預制檢查井模具、圓形井模具使用更簡單，拼裝和拆卸都十分方便，只需要簡單地將模具上的螺絲擰
緊，檢查模板間沒有留有縫隙就可以注漿了，而注漿后只需要幾十秒的振動時間，就可以放置在陰涼
通風的地方自然晾曬等待其凝固，這個過程基本不耗費人力，也不消耗工作時間，因為在等待模具中
混凝土完全凝固的過程中工人完全可以進行下一組的生產，有著高效快速的優勢；從個性化的尺寸設
計上來看，顧客在定制圓形井模具時，可以根據自己使用的管道直徑、需要的圓井寬度與廠家協商進
行定制打造的，所以使用這種模具生產出的混凝土圓井預制件都是可以滿足工程需要的，由于是定制
生產也就更能滿足使用和后續的配套。
Prefabricated inspection well molds and circular well molds are easier to use, and are
very convenient for assembly and disassembly. Grouting can be carried out only by simply
tightening the screws on the molds and checking that there is no gap between the molds.
After grouting, it only takes tens of seconds of vibration time to place them in a cool
and ventilated place for natural drying and wait for them to solidify. This process
basically does not consume manpower, It also does not consume working time, because in
the process of waiting for the complete solidification of concrete in the mold, workers
can carry out the next group of production, which has the advantage of high efficiency
and speed; From the perspective of personalized size design, customers can customize the
circular well mold according to their own pipe diameter and required circular well width
through consultation with the manufacturer. Therefore, the concrete circular well
prefabricated parts produced by using this mold can meet the needs of the project.
Because it is customized production, it can better meet the use and subsequent
supporting.
預制檢查井模具、圓形井模具所投入生產的檢查井大多數都是混凝土制造的一體化的預制件，因為用
料是客戶按照自己所需要的混凝土強度，按照專業而科學的數據配比的，制作檢查井時只需要將調配
并攪拌均勻的混凝土注入模具中，等待其自然成型，這樣產出的預制塊凝固后是自然一體的。
Most of the inspection wells put into production by prefabricating inspection well molds
and circular well molds are integrated prefabricated parts made of concrete, because the
materials are proportioned by customers according to their required concrete strength and
professional and scientific data. When making inspection wells, it is only necessary to
inject the evenly mixed concrete into the mold and wait for it to take shape naturally,
The prefabricated blocks produced in this way are naturally integrated after
solidification.
預制檢查井模具、圓形井模具專門設計的一種鋼材質工具，目前也被廣泛地應用在城市的光纖電纜鋪
設和檢查方面，用途多、適用范圍廣，無疑是因為其獨特的優勢，主要體現在其高效的生產速度、個
性化的尺寸設計和更高的產品質量方面。不似傳統的磚砌檢查井，磚塊出強度大，與水泥黏合處強度
小，正如水桶的短板才是它盛水的真實能力，所以一體化的檢查井受力時也是均勻的，不存在縫隙開
裂的問題，也就更結實更耐用；二是在價格方面，利用預制檢查井模具生產檢查井只需要組裝、刷油
、灌漿、震動、拆模五個步驟，十分簡單，只需要一個工人就可以進行大規模的生產，在勞動力成本
上十分節約。預制檢查井模具、圓形井模具在效率方面，每一個檢查井的制作中，從注漿后到拆模前
這一段時間人力都是解放的，而這段時間工人就可以進行下一個檢查井的生產，拆模時再按照注漿順
序拆模，這樣單人一天就可以生產幾十個檢查井預制件，節約了時間成本同時也提高了生產效率。
Prefabricated inspection well mold and circular well mold are specially designed steel
tools. At present, they are also widely used in urban optical fiber cable laying and
inspection. They have many uses and wide application range. Undoubtedly, because of their
unique advantages, they are mainly reflected in their efficient production speed,
personalized size design and higher product quality. Unlike the traditional brick
inspection well, the brick has high strength and low strength at the joint with cement.
Just like the short plate of the bucket is its real ability to hold water, so the stress
of the integrated inspection well is also uniform, there is no crack problem, so it is
stronger and more durable; Second, in terms of price, the use of prefabricated inspection
well molds to produce inspection wells only needs five steps: assembly, oil painting,
grouting, vibration and formwork removal. It is very simple. Only one worker can carry
out large-scale production, which is very economical in labor cost. In terms of
efficiency of prefabricated inspection well molds and circular well molds, during the
production of each inspection well, the manpower is liberated from the time after
grouting to the time before formwork removal, and during this time, the workers can carry
out the production of the next inspection well, and then remove the formwork according to
the grouting sequence, so that a single person can produce dozens of inspection well
prefabricated parts a day, It not only saves time and cost, but also improves production
efficiency.
