4.當原水濁度為100-500mg/L時，用量為5-10mg，即每千噸水5-10kg。使用前，根據水質特點進行小試，選擇合適的值，然后施工使用。
一、在低濁度水中，將固體聚合氯化鋁產品按照1：3份額(分量比)加自來水稀釋，并且攪拌至完全溶解
二、在日子、出產用污水中，參照每噸污水先投加30g左右的聚合氯化鋁產品。然后投加稀釋之后的聚丙烯酰胺產品，(假如作用不明顯，請酌情減少或增加產品投加量。)
三、在造紙廠污水處理中，選用低濁度水的投進份額配備，如作用不明顯可在酌量增加。
四、原水濁度在100-500mg/L時，投加量為5-10mg即每千噸水投量為5-10kg，用前根據水質特性進行小試，選出合適值，然后投用。The proposal of this cause has attracted wide attention at home and abroad, and has been recognized as one of the most influential and recognized milestones in the field of environment in recent years.
Thereafter, the construction of the concept factory was vigorously promoted. By the end of 2014, the preliminary design and site selection work will be completed, the overall design will be completed in 2016, and the project construction approval and construction design will be completed in 2017. Officials said that the first sewage treatment conceptual plant could be completed in 2019.
Wang Hongchen, deputy dean of the Environmental College of Renmin University of China, told reporters that a year and a half ago, the sewage treatment conceptual plant had gathered a group of powerful basic teams to carry out relevant experiments on the spot, build production and R&D centers, speed up the transformation of science and technology, and carry out ex
tensive industrial cooperation. "One is to build the experience center of new technology, promote the research and development, transformation and promotion of new technology; the other is to build the production-oriented research and development center of municipal sewage treatment, and build a new model of new technology from laboratory to practical application. Thirdly, we should promote the development of wastewater treatment technology from laboratory to engineering, and create a new high ground for China's cooperative industries.
According to the introduction, the concept factory initially established the technical route of sustainable water treatment facing the future, and established the business model and innovation model of "ecological complex" and "production-oriented R&D center" guiding industrial development.
For the basic ideas of the technical route, experts said that the main way is to improve energy recovery by carbon segregation, and to achieve the level of water treatment available. The effluent standard of "concept plant" will be much higher than that of current sewage treatment plants, which is of great significance for improving the quality of water environment and promoting ecological construction. "In the future, the conceptual plant will be expanded to an ecological area, like a demonstration of an urban ecological complex, and ultimately realize that a treatment plant can drive a city's ecosystem." Wang Hongchen said.
"Sewage treatment conceptual plant is an innovative work. It can not simply be regarded as a project, a project, a factory, but a social work to promote the leapfrog development of the industry." Wang Hongchen said so.
The damage of water pollution clearly shows that polyaluminium chloride is a reasonable way to deal with water pollution.
As a new year's first film, the piglet's past New Year is not the same as most movie promotion or promotion films. It's a story of "who is page". It's a story of "who is Paige": Li Yubao, who stays behind, doesn't know what his grandson wants to be "Paige". Finally, a pink Page was welded with a blower and sent to his grandson. Settlement Net Polyaluminium Chloride invites you to watch "What is Page"
What must be done and what must be said in the daytime can not be ignored now." Zhu Ziqing wrote in The Moonlight of Lotus Pond that "a person can think of anything and not think of anything in this vast moonlight, so he feels a quiet person." Last night, this valuable leisure was infected by a short video of "Who is Page?"
Henan Settlement Net Hebei Science and Technology Co., Ltd. year, has gone through 14 years in the beginning, the experience of the storm and pain in the hearts of the people, sweat and tears, success and happiness intertwined. Settlement net do not want to do anything is to do a good job of products, after hard struggle, our plant water treatment pharmaceutical products to reach the national GB15892-2003 specification. And through the ISO 9001:2000 international quality system certification, from all aspects of checks, the performance rate of the contract is 100%, the qualified rate of the products has reached 100%, which has been promulgated by the Municipal Technical Supervision Bureau as a reliable unit of quality and measurement.
According to the dosage of polyaluminium chloride in different water quality, the net settled polyaluminium chloride is introduced.
1. In low turbidity water, the solid polyaluminium chloride product is diluted by adding tap water in proportion of 1:3, and stirred until completely dissolved.
2. In daily and production wastewater, the polyaluminium chloride product should be added about 30g per ton of wastewater. Then add diluted polyacrylamide products. (If the effect is not obvious, please reduce or increase the product dosage as appropriate. )
3. In the sewage treatment of paper mills, the input share of low turbidity water should be selected and equipped. If the effect is not obvious, it can be increased at a reasonable level.
4. When the turbidity of raw water is 100-500 mg/L, the dosage is 5-10 mg, i.e. 5-10 kg per thousand tons of water. It is better to carry out small-scale tests according to the characteristics of water quality before using, select the appropriate value, and then put it into use.
氯化鋁 聚合硫酸鐵聚合氯化鋁鐵 這些是最常用的
還有阻垢劑 除磷劑 消泡 氨氮去除劑 葡萄糖 還有各種濾料 活性炭 沸石 無煙煤 石英砂 火山石 麥飯石 我的天啊 這么多東西 如何選擇呢 你懂嗎 污水處理是一個百年大計的 長久發展的業務工作水處理之后可以循環使用 或者達到排放標準 就能排放出去 不污染環境 污染水資源 水是人的生命之本 河南安家凈環保 致力于污水處理20余年 面對的客戶遍布全國各個行業領域 不了解這一個行的 平常人生活飲用的自來水 總以為來之簡單容易 用水破張浪費 不知道愛惜水資源 水來自于大自然的饋贈 但是為什么要有價格 價格成本在哪里 人工 運輸管道 再加上 水處理的成本 一般污水廠 飲用水廠處理成本一噸水在幾毛錢 多則1元左右 水處理的排放標準不一樣 還有很多砂石 污泥水不能飲用 只能用于工業使用 比如洗沙水 就能循環使用 造紙廠的水一樣可以 安家凈環保聚合氯化鋁 聚丙烯酰胺是非常專業的一個團隊 現場試驗 配比合適的藥劑用了 處理達到合適的排放使用標準 pam pac簡簡單單的6個字母 是多么強大的 有力的為地球環境做出了很大的貢獻 解決的了無數水處理難題
另外水不溶物也高于飲用水的，總的來說飲用水級的關乎人命，不能亂用，一定要是真正的飲用水級的，如果工業級的被用于飲用水，隱患很多。而且純度不同，工業用都是26-28%，飲用水用30%。
而污水處理的話，含量高低要求并不嚴格，含量低的不是太多就行，可以多投放些藥劑也可以達到預定的效果。
河南安家凈環保科技有限公司專業生產聚氯化鋁，主要分為飲水級，工業級，生產工藝主要分為噴霧法，滾筒法，資源貧乏山區的水處理時，直接加入水箱或水池中，攪拌均勻后靜止放置，上清液使用。一般情況下，50kg的水使用1g噴霧干燥型聚合氯化鋁。首先將噴霧干燥型聚合氯化鋁溶于10%～30%的水溶液中，然后加入待處理水中。根據處理后水的濁度，可適當提高或降低耗水量。
噴霧干燥型聚合氯化鋁的產品質量很多時候關系到人們的生命健康，因此，生產噴霧干燥型聚合氯化鋁具有明確標準，可以保證人們的健康和安全。
滾筒式聚氯化鋁 鋁含量一般,水不溶物高,多用于污水處理.
板框式聚氯化鋁 鋁含量高， 水不溶物低. 用于污水處理和飲用處理.
噴霧干燥聚氯化鋁 鋁含量高， 水不溶物低，溶解速度快，用于飲用水及更高標準水處理.
PAC聚氯化鋁由于噴霧干燥穩定性好，適應水域寬，水解速度快，吸附能力強，形成礬花大，質密沉淀快，出水濁度低，脫水性能好等優點，在同樣水質的情況下，噴霧干燥聚氯化鋁投加量減少，尤其在水質不好的情況下，噴霧干燥產品投量與滾筒干燥聚氯化鋁相比，可減少一半，不僅減輕了工人的勞動強度，而更重要的是減少用戶的制水成本。除此之外，用噴霧干燥產品可保證安全性，減少水事故，對居民飲用水非常安全可靠。When treating drinking water, polyaluminium chloride with low content will have more impurities and water insolubles, so high content is required. Especially in papermaking, cosmetics production is to use high content.
Drinking water must be treated at drinking water level. Heavy metals are not detected at industrial level, and insoluble substances in water are also higher than drinking water. Generally speaking, drinking water level is related to human life and can not be used arbitrarily. It must be a real drinking water level. If industrial level is used for drinking water, there are many hidden dangers. And the purity is different, industrial use is 26-28%, drinking water is 30%.
And sewage treatment, the content requirements are not strict, low content is not too much, you can put more medicines can also achieve the desired effect.
Henan an Jia Jing Environmental Protection Technology Co., Ltd. specializes in the production of polyaluminium chloride, which is mainly divided into drinking water level and industrial grade. The production process is mainly divided into spray method and roller method.
Drum-type polyaluminium chloride is generally used for sewage treatment because of its high water insoluble content.
Plate-frame polyaluminium chloride has high content and low water insoluble. It is used for sewage treatment and drinking treatment.
Spray drying has high content of polyaluminum chloride, low insoluble substance and fast dissolution rate. It is used for drinking water and higher standard water treatment.
PAC polyaluminium chloride has the advantages of good stability in spray drying, wide adaptation to water area, fast hydrolysis speed and strong adsorption capacity. It has the advantages of large alum, high quality and fast sedimentation, low turbidity and good dewatering performance. Under the same water quality, the dosage of spray drying polyaluminum chloride is reduced, especially when the water quality is not good, the product volume of spray drying is compared with that of drum drying polyaluminum chloride. It can be reduced by half, which not only reduces the labor intensity of workers, but also, more importantly, reduces the cost of water production for users. In addition, spray drying products can ensure safety and reduce water accidents, which is very safe and reliable for drinking water.
