全球疫情爆發下 凈水行業的路在何方
2020年注定是個多奈多難 艱苦抗爭的一年 有淚水又感動 也有勝利后的短暫喜悅 面對全球爆發性的大疫情 我們凈水行業又將如何發展 河南安家凈環保科技致力于生產聚丙烯酰胺 聚合氯化鋁 聚合硫酸鐵 20余年 經歷了很多很多 身處中原地區 比鄰湖北 疫情也是很嚴重的 進入3月 在領導下 黨的指揮下 基本戰勝疫情 企業復工復出陸續開始 聚合氯化鋁 聚丙烯酰胺的生產基本進入正常階段 因為我們的工人基本都是當地員工 技術成熟 生產工藝所需的原材料也是省內就能采購到的 聚丙烯酰胺 聚合氯化鋁作為污水處理的必備良藥 在每個企業 每個行業都是不可或缺的 但是影響不在我們內部生產 而是 外部 很多小企業 生產不能進行 用了最多的 洗沙 食品污水廠 污水站都是不能停歇的 影響最多的就是小的生產廠家 我們安家凈有著渾厚的生產力量 資金支持 和老客戶們的支持 每天的出貨量都在百噸以上 價格也是稅免租 刺激經濟 幫扶中小企業的度過難關的支持下 一直以質優價廉 穩定市場情緒 供應客戶需要
河南安家凈環保 聚丙烯酰胺 聚合氯化鋁 聚合硫酸鐵 選擇我們是選擇一份服務 一份誠信 一份感動 一份安穩 期待您的來電 安家凈環保 曹經理 15838356978 Where is the way of water purification industry under the outbreak of global epidemic
2020 is destined to be a tough year for donai, with tears, feelings and short joy after victory. In the face of the global explosive epidemic, how will our water purification industry develop Henan anjiajing environmental protection technology, devoted to the production of polyacrylamide poly aluminum chloride poly ferric sulfate? Over 20 years, we have experienced many experiences in Central China, neighboring Hubei Province The epidemic situation is very serious. In March, under the leadership of the government and the command of the party, we basically defeated the epidemic situation. The enterprises returned to work and started to produce polyaluminium chloride polyacrylamide, which basically entered the normal stage. Because our workers are basically the raw materials required by the mature production technology of local employees, and also the polyacrylamide that can be purchased in the province As a necessary medicine for sewage treatment, polyaluminium chloride is indispensable in every industry of every enterprise, but the impact is not on our internal production, but on the external production of many small enterprises, which can not use the most sand washing food sewage plants, sewage plants, which can not stop, the most impact is that small manufacturers, we have a strong production force to settle down With the support of capital support and old customers, the daily shipment volume is more than 100 tons, and the price is also provided to customers with the support of the government's tax-free and rent-free stimulus economy to help small and medium-sized enterprises through difficulties, with high quality and low price and stable market sentiment
Henan anjiajing environmental protection polyacrylamide polyaluminium chloride polyferric sulfate selection we choose one service, one integrity, one moving, one stable and looking forward to your call manager of anjiajing environmental protection Cao 15838356978
關于污水處理使用聚合硫酸鐵上水層出現漂浮物的原因以及解決方法
污水處理1. Improper operation, some non-professional personnel in the experiment used improper techniques, adding polyaluminium chloride, stirring too fast or too slow can not, the first experiment, there must be professional water treatment assistant, this is a very important point.
2. The amount of polyferric sulfate added is not well controlled (too much or too little dosage). In this case, suspended solids are most likely to float.
Before use, the product was put into the alum bath at a certain concentration (10-30%) and stirred with tap water to make it fully hydrolyzed. The product was put into a red-brown liquid and diluted with water until the required concentration was added and coagulated. Waterworks can also be added 2-5% directly, and industrial wastewater treatment can be added 5-10%. B. The determination of dosage depends on the proper amount of alum formed by production debugging or beaker experiment according to the nature of raw water. The other dosage used in water plant can be used as reference. Under the same conditions, the dosage of this product is approximately equal to that of solid polyaluminium chloride, which is 1/3-1/4 of that of solid aluminium sulfate. If the original liquid product is used, it can be calculated according to the concentration of the corresponding agent. It depends roughly on the weight ratio of 1:3.
Reasons and Solutions for Floating Matter in the Upper Water Layer of Polyferric Sulfate Used in Sewage Treatment
運用時可將本產品直接投加，或先參加溶解罐，濃度為10～20%，拌和，用泵投加到反響池。本產品適用的pH值規模廣，在酸性條件下運用效果尤佳，運用量約為100～1000ppm（即0.1～1公斤/噸廢水），依據廢水中磷酸根的含量不同其用量有所差異，詳細用量一般通過試驗斷定。
試驗時取一定量的原水，參加適量的本產品（如500ppm），將廢水pH值調節至7～8，www.hnldscl.com參加少數聚丙烯酰胺PAM絮凝沉積，過濾取上清液測定磷的含量。（如需處理重金屬，用上清液進行二次處理即可。）AC/PAM與除磷劑攪拌后的反應？使用時可將本產品直接投加，或先參加溶解罐，濃度為10～20%，拌和，用泵投加到反響池。本產品適用的pH值規模廣，在酸性條件下使用作用尤佳，使用量約為100～1000ppm（即0.1～1公斤/噸廢水），依據廢水中磷酸根的含量不同其用量有所差異，具體用量一般經過試驗斷定。The amount of polyferric sulfate added is right, but the PH value of wastewater is not right, and there is no optimum range of PH used in the corresponding reagents. The suitable range of PH value is 4-11, and the optimum range of PH value is 6-9. After purification, the change range of PH value and total alkalinity of raw water is small.
4, the type of water purification products is not correct. According to the characteristics of sewage, choose suitable water purifying agent suitable for its own sewage characteristics, such as polyaluminum chloride, polyaluminum chloride, polyaluminum ferric chloride, aluminum chloride, spray polyaluminum chloride, white polyaluminium chloride, etc., and listen to the advice of professional water treatment division, and give their advice. They are all professional.
Reasons and Solutions for Floating Matter in the Upper Water Layer of Polyferric S
ulfate Used in Sewage Treatment
Polyferric sulfate
5. The last point to consider is whether the quality of the polyferric sulfate you use meets the national standards, and whether the various indicators of the polyferric sulfate meet the national standards.
At present, the quality of polyferric sulfate is uneven in the market. Compared with the better quality of Polyferric sulfate, the probability of suspended solids will be very low. The better polyferric sulfate has almost no water insoluble solids, so the quality of products is also very important. Microbial activity has a promotive effect, that is, effluent color has an impact.
Adding chemical Dephosphorizer to the back of biochemical pond can completely avoid the reaction between various substances in water and dephosphorizer, consume the amount of reagent, and will not reduce the concentration of organic carbon in the influent of biochemical pond, affecting the effect of nitrogen and phosphorus removal by microorganisms. At the same time, it can avoid excessive dosage of phosphorus removal agents, and also make the residual agents into the biochemical system, which will affect the growth of microorganisms.
Adding phosphorus removal flocculant to the outlet of aerobic tank and phosphorus removal agent in front of secondary sedimentation tank can greatly reduce the use of phosphorus removal agent. This is because most phosphorus in wastewater has been removed in the process of biochemical treatment, and phosphorus migration and organic phosphorus are converted into positive phosphorus which can be treated by coagulation, which greatly improves the effect of phosphorus removal and improves the efficiency of phosphorus removal. Reduce the dosage of phosphorus removal agent, reduce sludge production, reduce phosphorus content in sludge. Therefore, chemical phosphorus removal agents are generally added to the biochemical process, before the secondary sedimentation tank, to save the cost of phosphorus removal from wastewater and improve the rate of reaching the standard. ?
When in use, the product can be directly added or participated in the dissolving tank, the concentration of which is 10-20%, mixed and pumped into the reaction tank. The product is suitable for a wide range of pH values, especially in acidic conditions. Its application amount is about 100-1000 ppm (i.e. 0.1-1 kg/ton wastewater). According to the different content of phosphate in wastewater, its dosage is different. The detailed dosage is generally determined by experiments.
During the experiment, a certain amount of raw water was taken and the product (such as 500 ppm) was added. The pH value of the wastewater was adjusted to 7-8. www.hnldscl.com participated in the flocculation and deposition of a few PAM. The supernatant was filtered to determine the phosphorus content. (If heavy metals need to be treated, the supernatant can be used for secondary treatment.) Reaction of AC/PAM with phosphorus removal agent after stirring? When in use, the product can be directly added or participated in the dissolving tank at the concentration of 10-20%. The product can be mixed and pumped into the reaction tank. The product is suitable for a wide range of pH values, especially in acidic conditions. Its usage is about 100-1000ppm (i.e. 0.1-1 kg/ton wastewater). According to the content of phosphate in wastewater, its dosage is different. The specific dosage is generally determined by experiments.
試驗時取一定量的原水，參加適量的本產品（如500ppm），將廢水pH值調理至7～8，參加少數聚丙烯酰胺PAM絮凝沉積，過濾取上清液測定磷的含量。（如需處理重金屬，用上清液進行二次處理即可。） FeCl3、及 AlCl3溶液充沛混合均勻后參加NaOH溶液，三者摩爾比為3∶2∶14；混合反響并靜置后濾出生成物，用水重復洗刷至出水為中性；于100-110℃下烘干并制成尺度均勻的粒狀吸附劑。
該吸附劑的使用，在慣例水處理工藝中增設吸附除磷工藝，吸附除磷工藝由2-4個串聯運轉的除磷吸附池組成，除磷吸附池結構同濾池，用粒狀復合鐵鋁除磷吸附劑作濾料，粒徑規模0.5mm-0.8mm，吸附層厚度為1.0-1.5m，吸附池水力負荷5m/h-8m/h，空床觸摸時刻30-40min。該吸附劑除磷適用規模廣；除污染效能優異，再生簡略，質料價格低，易得安全。
PAC/PAM與除磷劑制備辦法
FeCl3及 AlCl3溶液充沛混合均勻后參加NaOH溶液，三者摩爾比為3∶2∶14；混合反響并靜置后濾出生成w物，用水重復洗刷至出水為中性；于100-110℃下烘干并制成尺度均勻的粒狀吸附劑。
該吸附劑的使用，在慣例水處理工藝中增設吸附除磷工藝，吸附除磷工藝由2-4個串聯運轉的除磷吸附池組成，除磷吸附池結構同濾池，用粒狀復合鐵鋁除磷吸附劑作濾料，粒徑規模0.5mm-0.8mm，吸附層厚度為1.0-1.5m，吸附池水力負荷5m/h-8m/h，空床觸摸時刻30-40min。該吸附劑除磷適用規模廣；除污染效能優異，再生簡略，質料價格低，易得安In the experiment, a certain amount of raw water was taken and the product (e.g. 500 ppm) was participated in. The pH value of wastewater was adjusted to 7-8. A few PAM flocculating deposits were participated in. The content of phosphorus in the supernatant was determined by filtration. (If heavy metals need to be treated, the supernatant can be used for secondary treatment.) FeCl3, AlCl3 and AlCl3 solutions were mixed in NaOH solution with a molar ratio of 3:2:14; the product was filtered after mixing reaction and standing, and washed repeatedly with water until the effluent was neutral; the granular adsorbent was dried at 100-110 ~C and made into uniform size.
The adsorbent is used to remove phosphorus by adsorption in conventional water treatment process. The adsorbent consists of 2-4 series operation phosphorus removal adsorbents. The structure of the adsorbent is the same as that of the filter. The particle size of the adsorbent is 0.5mm-0.8mm, the thickness of the adsorbent layer is 1.0-1.5m, and the hydraulic force of the adsorbent is negative. Load 5 m/h-8 m/h, empty bed touching time 30-40 min. The adsorbent has wide application scale for phosphorus removal, excellent pollution removal efficiency, simple regeneration, low material price and easy to obtain safety.
Preparation of PAC/PAM and Phosphorus Removal Agent
FeCl3 and AlCl3 solutions were mixed in NaOH solution with a molar ratio of 3:2:14. After mixing and standing, W was filtered and washed repeatedly with water until the effluent was neutral. The granular adsorbent was dried at 100-110 C and made into uniform size.
The adsorbent is used to remove phosphorus by adsorption in conventional water treatment process. The adsorbent consists of 2-4 series operation phosphorus removal adsorbents. The structure of the adsorbent is the same as that of the filter. The particle size of the adsorbent is 0.5mm-0.8mm, the thickness of the adsorbent layer is 1.0-1.5m, and the hydraulic force of the adsorbent is negative. Load 5 m/h-8 m/h, empty bed touching time 30-40 min. The adsorbent is suitable for phosphorus removal on a wide scale, with excellent pollution removal efficiency, simple regeneration, low material price and easy access to safety.
FeCl3、及 AlCl3溶液充分混合均勻后參加NaOH溶液，三者摩爾比為3∶2∶14；混合反響并靜置后濾出生成物，用水反復洗刷至出水為中性；于100-110℃下烘干并制成尺度均勻的粒狀吸附劑。該吸附劑的使用，在常規水處理工藝中增設吸附除磷工藝，吸附除磷工藝由2-4個串聯運轉的除磷吸附池組成，除磷吸附池結構同濾池，用粒狀復合鐵鋁除磷吸附劑作濾料，粒徑規模0.5mm-0.8mm，吸附層厚度為1.0-1.5m，吸附池水力負荷5m/h-8m/h，空床觸摸時間30-40min。該吸附劑除磷適用規模廣；除污染效能優異，再生簡單，質料價格低，易得安全。
河道治理用的除磷劑適用規模
1、用于生活污水處理廠除磷，特別是合適中磷段污水處理；
2、合適于含外表處理工藝的工業廢水；
3、用于食品廠廢水；
4、用于制藥、造紙、農藥、化肥廠的廢水處理。
5、用于廢物填埋廠廢物滲濾液處理。After fully mixing and homogenizing AlCl3 solution, NaOH solution was added with a molar ratio of 3:2:14; the product was filtered after mixing and standing, and washed repeatedly with water until the effluent was neutral; the granular adsorbent was dried at 100-110 (?) C and made into uniform size. The adsorbent is used to remove phosphorus by adsorption in conventional water treatment process. The adsorbent consists of 2-4 series operation phosphorus removal adsorbents. The structure of the adsorbent is the same as that of the filter. The particle size of the adsorbent is 0.5mm-0.8mm, the thickness of the adsorbent layer is 1.0-1.5m, and the hydraulic force of the adsorbent is negative. Load 5 m/h-8 m/h, empty bed touch time 30-40 min. The adsorbent has wide application scale for phosphorus removal, excellent pollution removal efficiency, simple regeneration, low material price and easy safety.
Application Scale of Phosphorus Removal Agents for River Regulation
1. It is used for phosphorus removal in domestic sewage treatment plants, especially for medium phosphorus section sewage treatment.
2. Suitable for industrial wastewater containing surface treatment process.
3. Wastewater from food factories;
4. Wastewater treatment in pharmaceutical, papermaking, pesticide and fertilizer plants.
5. Waste leachate treatment in waste landfill plants.
