多年來聚合氯化鋁已發展成為技術成熟、市場銷量大的絮凝劑，并有逐步取代傳統絮凝劑的趨勢。西歐各國于1976年開始生產聚合氯化鋁，用作工業污水處理絮凝劑;美國、加拿大已于1983年批準將其用于城市給水和工業污水處理。 聚合氯化鋁是水處理混凝劑的常用藥劑，水處理效果顯著，在飲用水、工業污水凈化中有著至關重要的作用。我們常用到的聚合氯化鋁含量有：26%、28%、30%。聚合氯化鋁含量的不同，用途也不同，相對應的聚合氯化鋁價格也不同
水污染的危害顯而易見聚合氯化鋁合理攻堅管理水污染.對854個鄉鎮進行調查,每天的排放量達365.3億噸.其間工業廢水達成協議5.5億噸. 這些廢水絕大部分未經處理就直接排放, 污染了江河湖海. 水污染的危害是不是顯而易見的.水體污染,水質惡化對人體健康和人類日子,出產都帶來了嚴重的危害. Over the years, polyaluminium chloride has developed into a flocculant with mature technology and large market sales, and has gradually replaced the traditional flocculant. Western European countries began to produce polyaluminium chloride as flocculant for industrial sewage treatment in 1976, and the United States and Canada approved its use in urban water supply and industrial sewage treatm
污水進行絮凝沉淀，澄清是極為有效的，如酒精廠廢水、啤酒廠廢水、味精廠廢水、制糖廠廢水、肉食品廠廢水、飲料廠廢水、紡織印染廠的廢水等。用陽離子聚丙烯酰胺要比用陰離子聚丙烯酰胺，非離子聚丙烯酰胺或無機鹽效果要高數倍或數十倍，因為這類廢水普遍帶有陰電荷。
4、油田化學品 如粘土防膨劑、油田酸化用稠化劑品等。(PAM) is a linear water-soluble polymer, which is one of the most widely used varieties of water-soluble polymer compounds. PAM and its derivatives can be used as efficient flocculants, thickeners, paper enhancers and liquid drag reducing agents. They are widely used in water treatment, paper making, petroleum, coal, mining, metallurgy, geology, light textile, construction and other industrial sectors.
Nonionic polyacrylamide
Uses: 1. When the suspended sewage is acidic, it is more appropriate to use non-ionic polyacrylamide as flocculant. This is because PAM acts as an adsorption bridge to make suspended particles flocculate and precipitate, so as to purify the sewage. It can also be used to purify tap water, especially in combination with inorganic flocculants, and has the best effect in water treatment.
2. Adding some chemicals to textile industry auxiliaries can be used to compose chemical data for textile sizing.
3. Dissolve non-ionic polyacrylamide into 0.3% concentration and add crosslinking agent in sand control and sand fixation. Spraying on desert can play a role in sand control and sand fixation.
4. Soil moisturizers are used as basic materials of soil moisturizers and various modified polyacrylamides.
Cationic polyacrylamide:
Usage: 1. Sludge dewatering can choose the corresponding brand of this product according to the nature of sludge, which can effectively dewatering gravity sludge before the sludge enters the filter press. When dewatering, it produces large flocs, non-sticking filter cloth, non-dispersing, less dosage, high dewatering efficiency and less than 80% moisture content of mud cake.
2. The treatment of sewage and organic wastewater shows positive electricity in acidic or alkaline medium, so flocculation and precipitation of sewage with negative charge of suspended particles in sewage is very effective, such as wastewater from alcohol factory, brewery, monosodium glutamate factory, sugar factory, meat food factory, beverage factory and textile printing and dyeing factory. Cationic polyacrylamide is several or tens of times more effective than anionic polyacrylamide, nonionic polyacrylamide or inorganic salts, because such wastewater generally has negative charges.
3. Water treatment flocculant in Waterworks has the characteristics of low dosage, good effect and low cost. Especially, the combination of inorganic flocculant and inorganic flocculant has better effect.
4. Oilfield chemicals such as clay anti-swelling agents and thickeners for oilfield acidification.
5. Paper reinforcer cationic PAM is a water-soluble cationic polymer containing carbamoyl group. It has the functions of reinforcement, retention and filter aid. It can effectively improve the strength of paper. At the same time, the product is also a highly effective dispersant.
Anionic polyacrylamide
Uses: 1. Industrial wastewater treatment has the best effect on sewage treatment, such as coarse suspended particles, high concentration, positive charges of particles, neutral or alkaline PH value of water, iron and steel plant wastewater, electroplating plant wastewater, metallurgical wastewater, coal washing wastewater, etc.
2. Drinking water treatment in many Waterworks of our country comes from rivers. The content of sediment and minerals is high and turbid. Although it can't meet the requirements after sedimentation and filtration, it needs to add flocculant. The dosage of flocculant is 1/50 of inorganic flocculant, but the effect is several times that of inorganic flocculant. Inorganic flocculant and cationic flocculation of our company can be used for river water seriously polluted by organic matter. The effect of acrylamide is better.
3. Recycling of lost starch grains in starch factories and alcohol factories now contains a lot of starch in the wastewater of many starch factories. Anionic polyacrylamide is added to flocculate and precipitate starch particles, and then the precipitate is filtered into cake shape by pressure filter, which can be used as feed. Alcohol in alcohol factories can also be dehydrated by anionic polyacrylamide and reclaimed by pressure filter.
