- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
福斯RENOLIN UNISYN CKC100齒輪油，FUCHS RENOLINUNISYNCKC100
簡介：全合成聚烯烴基極壓齒輪油。與礦物油完全相容，滿足并超過DIN HC及ISO CKC等級，并取得FLENDER認可。建議用于承受高壓和工作溫度波動大的軸承及齒輪箱潤滑系統中。
油具有摩擦系數低,減少磨損。此外,這些油提高效率的機器部件。根據用途,一批能滿足粘度等級由一個單一的RENOLINCKC。這允許用戶來謀求股票和削減成本。Polyalphaolefins,因此RENOLINCKC油,混合和兼容礦物油在所有比率以及可以disposed-of等。polyalphaolefins的相容性與普通機械材料、海豹和漆面護理,與礦物油。RENOLIN轉換速率,因此非常簡單,不需要事先的沖洗。具體的好處是使用RENOLINCKC油是:極好的耐老化優秀的防腐蝕cold-flowing性能好優秀的粘溫行為用途:RENOLINCKC齒輪油可用于軸承潤滑系統和變速箱受溫度高或波動。在齒輪箱,潤滑系統在溫度超過90°C槽,正常的礦物油的間隔變化能明顯延長UNISYN油RENOLINCKC,反過來,大幅度降低了操作和處理成本。
| RENOLIN UNISYN CKC | 68 | 100 | 150 | 220 | 320 | 460 | 680 | ||
| Lubricating oil type | |||||||||
| acc. to ISO 6743-6 | CKC 68 | CKC 100 | CKC 150 | CKC 220 | CKC 320 | CKC 460 | CKC 680 | ||
| acc. to DIN 51 502 | HC 68 | HC 100 | HC 150 | HC 220 | HC 320 | HC 460 | HC 680 | ||
| Characteristics | Unit | Test method | |||||||
| Kinematic viscosity | |||||||||
| at 40 °C | mm2/s | 72 | 104 | 151 | 221 | 315 | 479 | 668 | ASTM D 445 |
| at 100 °C | mm2/s | 11.1 | 14.9 | 19.4 | 25.8 | 33.3 | 45 | 62 | ASTM D 445 |
| Viscosity index | 146 | 149 | 147 | 148 | 148 | 149 | 159 | ASTM D 2270 | |
| Density at 15 °C | kg/l | 0.837 | 0.842 | 0.848 | 0.85 | 0.851 | 0.853 | 0.855 | ASTM D 1298 |
| Flash point, Cleveland open cup | °C | 248 | 254 | 230 | 232 | 234 | 304 | 262 | ASTM D 92 |
| Pour point | °C | -51 | – 45 | – 45 | – 42 | – 39 | – 33 | – 33 | ASTM D 97 |
| Neutralization number | mg KOH/g | 0.8 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | ASTM D 974 |
| Foaming, | |||||||||
| seq. I | ml | 5/0 | 5/0 | 5/0 | 5/0 | 5/0 | 5/0 | 5/0 | ASTM D 892 seq. I III |
| seq. II | ml | 15/0 | 15/0 | 15/0 | 15/0 | 15/0 | 15/0 | 15/0 | ASTM D 892 seq. I III |
| seq. III | ml | 5/0 | 5/0 | 5/0 | 5/0 | 5/0 | 5/0 | 5/0 | ASTM D 892 seq. I III |
| Copper corrosion | degree of corr. | 1a-100A24 | 1a-100A24 | 1a-100A24 | 1a-100A24 | 1a-100A24 | 1a-100A24 | 1a-100A24 | ASTM D 130 |
| Rust prevention | pass B | pass B | pass B | pass B | pass B | pass B | pass B | ASTM D 665 | |
| Four ball EP test | N | 2200 | 2400 | 2400 | 2400 | 2400 | 2400 | 2400 | ASTM D 2783 |
| FZG mechanical gear rig test | load stage | > 12 | > 12 | > 12 | > 12 | > 12 | > 12 | > 12 | DIN 51 354-2 |
