- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
MIC-10DL超聲波硬度計MIC10DL
Krautkramer超聲波硬度計MIC10/MIC10DL利用UCI(超聲波接觸阻抗)方法能快速、方便地對維氏硬度凹處進行評價，無需使用顯微鏡。小而輕的MIC 10使用電池供電，可在現場快速使用，在各方面不受限制，甚至可用在端頭位置。該儀器可適用于任何形狀、尺寸的大多數細晶粒、材料，特別適合于小公差范圍內確定材料特性。可測量的工件部位包括法蘭盤邊緣和齒輪根部，也可在任何方向測量，如水平或垂直向上。儀器特點-高精度測量：連續頻率測量在進入測量表面的穿透過程中得到監控；硬度值的變化和顯示：?jiǎn)挝籋VHB、HRC、HRB和抗拉強度N/mm2；MIC-10DL ultrasonic hardness tester MIC10DL
Krautkramer ultrasonic hardness MIC10/MIC10DL using UCI (ultrasonic contact impedance) method can rapidly,conveniently to Vivtorinox hardness recess evaluation,without using a microscope. Small and light MIC 10battery powered, can quickly in the field, is not restrictedin all aspects, and even can be used in end position. This instrument can be applied to any shape, size, most of thefine grain materials, especially suitable for small tolerance range to determine material properties. Workpiece can bemeasured include the flange edge and gear root, can also be measured in any direction, such as horizontal orvertical. High precision measurement instrument features:continuous frequency measurement to be monitored inthe penetration into the measurement of surface; changes of hardness value and display: unit HVHB, HRC, HRB and tensile strength of N/mm2;
Product Name: MIC10/MIC10DL ultrasonic hardness tester
Product type: ultrasonic hardness tester
Product type: MIC10/MIC10DL
MIC10DL for the storage type, equipped with internal memory and an additional storage card;
- records approximately 1500 measurements, anothermemory card can store about 590 measurements
Printable static indicator function (maximum, minimum reading, reading the absolute and relative standard deviation);
RS232 interface through the computer remote control or by a printer can test results file.
Technical parameters
Measurement conversion range: 20 ~ 1740HV, 48 ~ 105HRB, 20 ~ 68HRC, 76 ~ 618HB, 5 ~ 2250N/mm2 (10Kg probe)
Display: 4 LCD switch with backlight
Resolution: 1HV; 1HB; 5N/mm2; 0.1/0.5/1HRC and HRB(optional)
Data: data recorder can store 1500 measurements, storage card can store 590 data (MIC10DL)
Interface: RS232 interface, can be used for two-way communication between the printer and computer (MIC10DL)
Power: 2 1.5V batteries
Dimensions and weight: 160x70x45mm, 300g
Hardness meter probes and accessories
= manual probe MIC20A1:10N/1Kgf load, especially suitable for small groove surface
= manual probe MIC205A:50N/5Kgf load, is suitable for application of the majority of the
= manual probe MIC2010A:100N/10Kgf load, suitable for coarse grain material and rough surface
= manual long probe MIC201AL (10N/1Kgf load)/MIC205AL (50N/5Kgf load): equipped with a long rodoscillation (37mm).
= is used to measure the profile surface, or workpiecestructure of deep cavity / groove. As the worm gear and the meshing gear.
= electric probe MIC2103A (3N/0.3Kgf), MIC211A (about 8N/0.8Kgf) and electric probe MIC2101A (1N/0.1Kgf): the hardness of diamond Vivtorinox equipped with electric control meter, can obtain reliable measurement result.
= hardness reference block inspection
The short probe, probe, long probe, electric probe, the probe parameters
