- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
CT6520數字式發動機轉速表CT-6520
|
用CT-6520能直接讀出0.5～199.5P/R的r/min轉速脈沖信號。 模擬輸出可用來接筆式記錄儀或其它指示器，供用戶掌握測量或試驗的總體趨向。電路設計上，采用了獨特的方法將輸入信號倍頻，形成一定的脈沖序列后再轉換成模擬量，使儀器的抗干擾性大為增強，從而實現了高精度的測量。 |
特點
· 對轉速很低的脈沖信號，也能直接讀出其 r/min 的值
· 采用大型 LED 顯示
· 數字輸出、模擬輸出和脈沖輸出為標準配置
· 采用交直兩用電源
規格簡介
|
型 號 |
CT-6520 |
|
適配傳感器 |
IP-292、IP-296、IP-3000、VP-202、VP-201、OM-200、MP-910、MP-981、LG-916、帶TTL電平輸出的傳感器 |
|
測量范圍 |
400 ～ 20,000 r/min |
|
輸入脈沖頻率選擇 |
0.5～199.5P/R: 根據傳感不同，頻率間隔可從0.5P/R 檔起任意選擇 |
|
顯示方式 |
5位LED顯示(綠色)(但顯示值最大不超過20,000 r/min) |
|
測量時間 |
1 秒 |
|
顯示精度 |
±0.02 ％ / F.S.、F.S.±1計數以內(400～20,000 r/min) |
|
輸入端子 |
BNC 插座及 R03-PB6M 接插件 |
|
脈沖輸出 |
1P/R、60P/R(與輸入信號不同步)，以及輸入信號的整形波輸出(BNC插座、TTL電平) |
|
數字輸出 |
5位 BCD 碼輸出、TTL電平 (適配接插件57-30500) |
|
模擬輸出 |
電壓輸出：0～10 V / 0～20,000 r/min，負載阻抗大于 1kΩ(標準配置) |
|
輸出控制觸點 |
發動機啟動：1～99 × 100 r/min
＜轉移觸點＞ |
|
傳感器用電源 |
DC 12 V ± 0.6 V(100 mA) |
|
重 量 |
約 3 kg |
|
使用溫度范圍 |
0 ～ ＋40℃ |
|
使用電源 |
AC100V～240V±10％ 50/60 Hz 30W、DC11～15V 25W |
|
價 格 |
請與本公司在各個國家或地區的代理商聯系。 |
|
選購件 |
電流出力 0 ～ 20 mA/ 0 ～ 20,000 r/min |
CT6520 CT-6520 digital tachometer
Can directly read the 0.5 ~ 199.5P/R r/min speed pulse signal by CT-6520.
The analog output can be used to pick up a pen recorderor other indicator, the overall trend for the user to master measurement or test. Circuit design, using a uniquemethod of the input signal frequency, forming a certain pulse sequences is then converted to analog, theinterference of instrument is greatly enhanced, so as to realize the high precision measurement.
Characteristic
· to very low speed pulse signal, it can directly read thevalues of r/min
The large LED display
Digital output, analog output and the output pulse for the standard configuration
The AC and DC power supply
Specifications
Type number
CT-6520
Fit sensor
Sensor IP-292, IP-296, IP-3000, VP-202, VP-201, OM-200, MP-910, MP-981, LG-916, TTL level output
Measuring range
400 - 20000 r/min
The input pulse frequency selection
0.5 - 199.5P/R: based sensor, frequency interval from0.5P/R files on arbitrary choice
Display mode
5 LED display (green) (but show the maximum not more than 20000 r/min)
Measurement of time
1 seconds
Display accuracy
Within ± 0.02% / F.S., F.S. ± 1 count (400 ~ 20000 r/min)
The input terminal
BNC socket and R03-PB6M connector
Pulse output
1P/R, 60P/R (not synchronized with the input signal), and shaping the input signal wave output (BNC socket, TTL level)
Digital output
5 yards of BCD output, TTL level (adapter connector 57-30500)
Analog output
Output voltage: 0 ~ 10 V / 0 ~ 20000 r/min, the load impedance is greater than 1K Ω (standard
Output current: 0 ~ 20 mA / 0 ~ 20000 r/min, the load impedance is less than 100 Ω (optional, transformation
(note) output voltage or output current, can only choose between them, can't have it both ways. (adapterconnector BNC)
Output control contact
Engine start: 1 ～ 99 × 100 r/min
The engine speed: 1 ～ 199 × 100 r/min
Discrimination time interval: every 100ms judge a
< > transfer contact
Contact capacity: AC240V / 2A, DC 30V/2A, load impedance
Power supply for sensor
DC 12 V ± 0.6 V (100 mA)
Weight
About 3 kg
Operating temperature range
0 ~ 40 C
The use of power
AC100V ~ 240V + 10% 50/60 Hz 30W, DC11 ~ 15V 25W
The price
Please contact with the company agents in each country or region.
Optional
The current output of 0 ~ 20 mA/ and 0 ~ 20000 r/min
Voltage output from 0 to 2 V/ 0 to 20000 r/min
The mounting fixture
Sensor
