- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
SE1620汽油發動機轉速表SE-1620 Tachometer
|
能對應各式各樣的點火脈沖傳感器，只要一接上就能測出汽油發動機的轉速。量程比前一個型號要寬一倍，達20,000r/min。模擬表頭采用2重刻度顯示。 輸入和輸出端以及電源輸入都采用隔離屏蔽裝置，所以能輸出高質量、抗干擾性強、穩定性好的模擬信號和脈沖信號。 |
特點
· 可測至 20,000 r/min
· 能對應各種各樣發動機的轉速傳感器，同時也能對應 5V 系列 ECU 的轉速脈沖輸入
· 通過對輸入靈敏度的選擇和調整，使輸入信號根據不同的點火系統和傳感器達到最佳程度
· 采用100mm見方的廣角表頭，視角寬廣，便于讀取數據
· 采用直流供電(12VDC或24VDC)，方便用戶進行車載或野外試驗
· 模擬輸出及脈沖輸出為標準配置
規格簡介
|
輸入 |
適配傳感器 |
IP-292 點火脈沖傳感器(用于初級低壓端) |
|||||||||||||||||||||
|
測量對象 |
汽油發動機 |
||||||||||||||||||||||
|
測量范圍 |
|
||||||||||||||||||||||
|
輸入接插件 |
傳感器輸入端：BNC插座 |
||||||||||||||||||||||
|
輸入增益選擇 |
有1、5、10、20倍4檔供選擇 |
||||||||||||||||||||||
|
顯示 |
顯示器 |
100 mm見方的廣角表頭(精度為1.5級) |
|||||||||||||||||||||
|
表盤刻度 |
0 ～10,000 r/min 和 0 ～20,000 r/min 的兩重刻度 |
||||||||||||||||||||||
|
模擬輸出 |
輸出電壓 |
0 ～ 10 V (0 ～ 10,000 r/min 或 0 ～ 20,000 r/min) |
|||||||||||||||||||||
|
輸出電壓精度(溫度漂移) |
零點漂移：± 0.2 % / F.S.（25℃） |
||||||||||||||||||||||
|
線性度 |
小于±0.2 % / F.S. |
||||||||||||||||||||||
|
交流雯波系數 |
小于250 mVp-p (當轉速為500 r/min時) |
||||||||||||||||||||||
|
輸出組抗 |
小于1 Ω (25℃) |
||||||||||||||||||||||
|
頻率相應 |
約 20 ms |
||||||||||||||||||||||
|
負載阻抗 |
大于10 kΩ |
||||||||||||||||||||||
|
脈沖輸出 |
輸出波形 |
矩形波：脈寬約2 ms(輸入信號為曲軸每轉兩圈輸出1個脈沖) |
|||||||||||||||||||||
|
輸出電壓 |
Hi：約 4.5 V、Lo： 約 0.5 V |
||||||||||||||||||||||
|
負載阻抗 |
大于50 kΩ |
||||||||||||||||||||||
|
一般仕様 |
電 源 |
DC 12 ～ 24 V |
|||||||||||||||||||||
|
消耗電流 |
約 500 mA （DC12V時） |
||||||||||||||||||||||
|
使用溫度范圍 |
0 ～ +40 ℃ |
||||||||||||||||||||||
|
保存溫度范圍 |
-10 ～ +60 ℃ |
||||||||||||||||||||||
|
重 量 |
約 1.3 kg |
||||||||||||||||||||||
|
外形尺寸 |
221 (W) x 116 (H) x 150 (D) mm |
||||||||||||||||||||||
|
附屬品 |
模擬輸出信號電纜 (1.9m) |
SE1620 SE-1620 Tachometer gasoline engine tachometer
Corresponding to every kind of ignition pulse sensor, aconnection can measure the speed of a gasoline engine.Wide range one times than previous models, up to 20000r/min. Simulation with 2 scale display meter.
The input and output and power input are isolated byshielding device, so the analog signal output high quality,strong interference resistance, good stability and pulse signal.
Characteristic
· can be measured to 20000 r/min
· can speed sensor corresponds to a variety of engine,but also the corresponding 5V series ECU speed pulse input
The selection and adjustment of the input sensitivity, so that the input signal according to the ignition system andsensors of different optimal degree
· wide-angle header, the 100mm square, wide visual angle, easy to read data
The DC power supply (12VDC or 24VDC), convenient for the user to test vehicle or field
· analog output pulse output is standard
Specifications
Input
Fit sensor
The IP-292 ignition pulse sensor (for primary low end)
The IP-296 ignition pulse sensor (for the high voltage end)
The IP-3000 ignition pulse sensor (for primary low end)
OM-200 electromagnetic speed sensor (for induction ignition coil)
VP-202 gasoline and diesel engines and electric vibrationsensor
TTL level output sensor (LG-916 photoelectric sensor)
The measured object
Gasoline engine
2 stroke (single, double cylinder, 3 cylinder, 4 cylinder)
4 stroke (single, double cylinder, 3 cylinder, 4 cylinder, 5 cylinder, 6 cylinder, 8 cylinder, 10 cylinder, 12 cylinder)
Measuring range
■ 2 stroke
Single, double cylinder:
500 - 20000 r/min
3 cylinder:
500 - 16000 r/min
4 cylinder:
500 - 12000 r/min
■ 4 stroke
1 ~ 5 cylinder:
500 - 20000r/min
6 cylinder:
500 - 16000r/min
8 cylinder:
500 - 12000r/min
10 cylinder:
500 - 10000r/min
12 cylinder:
500 - 8000r/min
Input connector
The sensor input socket: BNC
TTL level input end: the 6 core socket (R03RB6F,external power supply: 12V/100 mA)
Input gain selection
There are 1, 5, 10, 20 times 4 file options
Display
Monitor
Wide angle meter 100 mm square (accuracy 1.5)
Dial gauge
A scale of 0 to 10000 r/min and 0 ~ 20000 r/min
Analog output
The output voltage
From 0 to 10 V (0 ~ 10000 r/min and 0 ~ 20000 r/min)
The accuracy of the output voltage (drift)
Zero drift: + 0.2% / F.S. (25 ℃)
Full scale drift: + 0.3% / F.S. (25 ℃)
Linearity
Less than 0.2% / F.S.
AC cam wave coefficient
Less than 250 mVp-p (when the speed is 500 r/min)
Output impedance
Less than 1 Ω (25 ℃
Frequency response
About 20 ms
The load impedance
More than 10 of K
Pulse output
The output waveform
Rectangular wave: pulse width of about 2 ms (input signalfor the crankshaft rotates in two ring output 1 pulse)
The output voltage
Hi: about 4.5 V, Lo: 0.5 V
The load impedance
More than 50 of K
General specifications
Power source
DC 12 to 24 V
Current consumption
About 500 of mA (DC12V)
Operating temperature range
0 ~ +40 ℃
Storage temperature range
-10 ~ +60 ℃
Weight
About 1.3 kg
Size and shape
221 (W) x 116 (H) x 150 (D) mm
Accessories
The analog output signal cable (1.9m)
Pulse output signal cable (1.9m)
Power cable (3.4m)
