MH-300E數字固體密度計/比重計Hydrometer MH-300E

MH-300E digital solid density meter / hydrometer Hydrometer MH-300E

MH-300E digital solid density meter / hydrometer Taiwan matsuhaku application: rubber special weight scale /gauge / density meter, plastic special weight scale /gauge / gravity density meter, special wire and cablebalance / hydrometer / density meter, special proportion of hard alloy balance / hydrometer / density meter, specialproportion of powder metallurgy industry balance /hydrometer / density meter, the proportion of specialresearch laboratory of new material balance / hydrometer/ density meter

Principle: according to the ASTM, JIS, GB / T, ISO standard. By A Kimi De.

The principle of buoyancy method, accurate, directmeasuring values.

Technical data:

Rubber: density itself is one of the basic properties of the rubber materials, the manufacturing of different products,adding polymer formulation and curing degree withdifferent. The density and hardness, tensile strength,elongation, abrasion resistance, deformation amount of skew, rebound, oil expansion... Mutual influence. So therubber in addition to its own characteristics, its density,volume before and after adding sulfur will be accompanied by adding sulfur amount and curing degreechange, its physical properties will be different. Therubber with sulfur must be measured before and after the density value.

Plastic: for synthetic polymer compound, synthesized or condensation polymerization with monomer raw materials.Plastics are divided into two kinds of thermosetting andthermoplastic. Plastic particles can be directly measuredthe proportion, do not need to be pressed into thespecimen retest.

Carbide: pores of the products was generally below 5%,according to MPIF specification, which belongs to the non absorbent products. Hard alloy belongs to high densityproducts, parts of die casting, so there will be a gap, gapsize and size will affect the durability and the strength of the parts. The measurement can be proportion value for the incoming inspection and final inspection basis.

Powder metallurgy: prior to forming the raw materials,addition of adhesive, lubricant such as zinc stearate,lithium stearate and ash, graphite powder, to be mixed evenly, and then forming. The forming embryoid bodies incontact with the outside of the pore was more or lessfilled with lubricant and graphite powder. Combined withfield work, confirmed in the test mode and density,powder immediately adjusted according to the embryodensity measurement can be filled, to avoid excessive orinsufficient filling powder filling. In order to shorten thetime needed to complete the shutdown, density measurement and fast.

Function and specification:

Model: MH - 300E

Measuring range: 0.01g.300g

Test category: solid, granular, film, floating body

Test time: 5 seconds

Density range: > 1, < 1 can test

Density: 0.001 g / cm3 accuracy

Setting: temperature compensation, compensation settingsolution

Function: can directly display density

Standard interfaces: RS-232

Standard accessories:

A: anti floating frame

B: particle measuring tool

C: stainless steel hanging box