- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
HCH-2000E超聲波測厚儀HCH2000E Thickness gauge
一、概述
|
二、產品性能
1、測量范圍：0.7～500mm（45＃鋼)。
2、聲速范圍：1000～9990m/s
3、顯示精度：0.1mm
4、測量誤差：1％*厚度值±0.1mm
5、使用環境：溫度-10℃～60℃ 相對濕度小于90％
6、測量方式：手動存儲測量
7、存儲容量：600個測量點
8、外形尺寸：175＊70＊25mm3
9、探頭頻率：2MHz-10MHz
10、帶自動背景光
11、自動斷電：本儀器待機五分鐘將自動關機
|
|
|
三、HCH-2000E型超聲波測厚儀配置單
1、HCH-2000E型主機 1臺
2、探頭 (φ8、φ10各一支) 2支
3、耦合劑 1瓶
4、鋼銼 1把
5、階梯試塊 1塊
6、7號電池 2節
7、使用說明書 1份
8、保修卡、合格證 1份
9、手提箱 1只
選配件：
1、打印機及通訊打印連線 1套
2、微機通訊軟件 1盤
3、高溫、鑄鐵、小管徑探頭
|
|
Ultrasonic thickness tester HCH-2000E HCH2000EThickness gauge
One, overview
The measurement range of HCH-2000E type ultrasonicthickness gauge: 0.7 ~ 500mm, the display precision:0.1mm, the internal circuit of the instrument adopts thelatest digital electronic technology, has the advantages of small volume, low power consumption, strong penetrating power, beat resistance, vibration resistance, showing the value of stable, high detection precision, the measured value can store, with male metric conversion, FSP wasChinese menu, large screen liquid crystal display, can be connected to computer, printer, is your preferred instruments in practical application.
Ultrasonic thickness measurement instrument for thickness measurement is based on the principle of ultrasonic pulse reflection, when the probe transmitted ultrasonic pulses through the object to be measuredwhen reaching the material interface, pulse to be reflected back to the probe, through the precise measurement of ultrasonic propagation time in the material to determine the thickness of the material to be measured. It can sheet and machining parts for the accurate measurement of various materials; the production equipment of all kinds of piping and pressurevessel monitoring, detecting them in the process of using corroded thinning degree. Can not remove the oil paint layer, accurate measurement of the thickness of plate.
Scope of application: used for measuring the thickness ofhard materials, such as: steel, stainless steel, aluminum,copper, chrome and other metal materials, and plastic,rubber, ceramics, glass and other non-metallic. The apparatus is widely used in the petroleum, chemical,electric power, boiler, metallurgy, shipbuilding, aviation,aerospace and other fields.
Two, product performance
1, range: 0.7 ~ 500mm (45 steel).
2, speed range: 1000 ~ 9990m/s
3, the display precision: 0.1mm
4, the measurement error: 1%* thickness value of ± 0.1mm
5, the use of the environment: temperature of -10 ℃ ~ 60℃, relative humidity is less than 90%
6, measurement mode: manual storage measurement
7, storage capacity: 600 measurement points
8, size: 175 * 70 * 25mm3
9, probe frequency: 2MHz-10MHz
10, with automatic background light
11, automatic power-off: this instrument will automatically shutdown standby for five minutes
Three, HCH-2000E type ultrasonic thickness gaugeconfiguration
1, HCH-2000E type 1 computers
2, probe (φ 8, φ 10 each)
3, coupling agent 1 bottles
4, file 1
5, step test block 1 block
6, 7, 2 batteries
7, the use of specification 1
8, the warranty card, 1 Certificate
9, suitcase 1
Optional accessories:
1, the printer and print 1 sets of communication lines
2, computer communication software 1 set
3, high temperature, cast iron, small diameter probe
