- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
TP201A精密型差壓計TP-201A微壓差計
TP201A精密型差壓儀在采暖、通風、空氣調節、環境監測、節能監測、氣象、農業、冷藏、制藥、凈化室測試及標定壓力等各方面均有廣泛的用途。TP201A precision pressure gauge TP-201A micro manometer
TP201A precision differential pressure instrument in theheating, ventilation, air conditioning, environmental monitoring, energy monitoring, meteorological,agricultural, cold storage, pharmaceutical, clean roomtesting and calibration pressure all have a wide range of uses.
Technical indicators
Main function
* manual pressure zero calibration function
* display measured values freeze function
* display backlight switch function
* can set the environment compensation function
* large screen dot matrix LCD display
Technical note
* measurement range: differential pressure 0 ~ + 2000Pa,the wind speed of 1 ~ 60m/s
* the measurement accuracy: differential pressure: ± 1%FS. The wind speed (with a pitot tube): + 5%FS.
* minimum resolution: differential pressure: 1Pa; wind speed: 0.1 m/s
* operating temperature: 0 ~ 50 ℃, relative humidity: ≤ 85%RH.
* Power: 1 9V alkaline batteries. Continuous working timeis not less than 10 hours.
Use the matters needing attention
* in measuring wind speed, must make full pressure port at wind direction pitot tube.
* use a pressure guiding pipe is short as far as possible,is more than 3 metres in length.
* pressure should not exceed ± 2000 Pa, otherwise,sensor damage due to excessive pressure causes is notwithin the scope of the warranty.
* the instrument from the factory the day, within a year as a result of the ill manufacturing is not working properly,plant is responsible for replacement or repair thedamaged parts free of charge.
* in order to ensure the measuring accuracy, the usershould be calibrated at least annually in specialequipment measuring departments approved. If the localdoes not have the conditions by the factory forcalibration.
* the factory in the process of production and sales, such as the case of type, packaging, specifications and otheraspects of change, without notice.
Storage and transport instrument
* the instrument should be no effect of corrosive gas andstrong mechanical vibration and strong magnetic field in the ventilation, drying, indoor.
* without long-term instruments, should remove the battery, so as not to damage the instrument.
* instrument in the transportation process, should pay attention to moistureproof, waterproof, shockproof,sunscreen.
With the cargo to provide
* TP201A host.......................................... 1
* 1 m Φ 4 × 6mm silicon hose.............................. 2 root
* the product manual.................................... 1
* product certificate.......................................... 1
* 9V alkaline batteries.......................................... The 1 Section
* portable box................................................ 1
Optional accessories
* the pitot tube
