- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
德國EPK公司麥考特覆層測厚儀
德國EPK公司麥考特覆層測厚儀，精確無誤地測量鋼鐵上的涂層鍍層厚度：
·電鍍層，電鍍鎳層，磷化膜
·油漆，粉末涂層
·塑料，橡膠
MIKROTEST覆層測厚儀、測量鋼上所有非磁性涂層鍍層厚度（如漆、粉末涂層、塑料、鋅、銅、錫及鎳）。測量快速、精確、無損，三十多年來MICROTEST 已成為被廣泛應用的自動測定涂鍍層厚度的專用儀器。德國的“訣竅”說明它在工藝技術及精度方面，具有磁性覆層測厚儀的最高水準。
所有儀器均符合DIN、ISO及ASTM標準。MIKROTEST完全自動操作。在使用時具有無可比擬的如下特性：
1.自動測量不會發生誤操作
2.易于掌握并具有極高精度
3.不用校準、設定、檢測簡便
4.不需要電池或其他電源
5.自動報出厚度讀值
6.用無損測頭，一點測定
7.金屬鎧裝適于室外頻繁操作使用
8.抗機械沖擊、耐酸及溶劑腐蝕
9.平衡裝置消除地心引力影響，可在任意方向和管內準確測量。
|
型 號 |
測量范圍 |
讀值精度 |
最小測量區 直徑 |
最小半徑 凸 凹 mm mm |
基體最小 厚度mm |
最適合用于 |
|
MIKROTEST G 6 |
0－100μm |
1μm或5％讀值 |
20mm |
5 25 |
0.5 |
鋼鐵上電鍍層、漆、搪瓷、塑料、橡膠層 |
|
MIKROTEST F 6 |
0－1000μm |
5μm或5％讀值 |
30mm |
8 25 |
0.5 |
|
|
MIKROTEST 6 S3 |
0.2－3mm |
5％讀值 |
30mm |
15 25 |
1.0 |
|
|
MIKROTEST 6 S5 |
0.5－5mm |
5％讀值 |
50mm |
15 25 |
1.0 |
|
|
MIKROTEST 6 S10 |
2.5－10mm |
5％讀值 |
50mm |
15 25 |
2.0 |
|
|
MIKROTEST 6 S20 |
7.5－20mm |
5％讀值 |
1000mm |
100 150 |
7.0 |
|
|
MIKROTEST 6 Ni50 |
0- 50μm |
1μm+5%讀數 |
15mm |
5 25 |
- |
非鐵制基體上鍍鎳 |
|
MIKROTEST 6 Ni100 |
0- 100μm |
|||||
|
MIKROTEST NIFE50 |
0－50μm |
2μm + 8％讀值 |
20mm |
10 25 |
0.5 |
鐵上電鍍鎳 |
從上表可選出最適用型號的MIKROTEST解決您所遇到的問題。MIKROTEST 易于操作，測量時只需向前旋動指輪到標尺端部，將測頭定在測量區上，松開自鎖機構，開始自動測量。MIKROTEST鎖定后，就能直接在標尺上顯示出涂層厚度的正確值，單位μm或mm。按說明書規定操作，MIKROTEST 可不間斷地使用很多年，為您進行質量控制。
The German company EPK McCourt coating thickness gauge
The German company EPK McCourt coating thickness gauge, accurate measurement of coating thickness of coating on iron or steel:
· plating, nickel plating, phosphating film
· paint, powder coating
· plastic, rubber
MIKROTEST cladding steel thickness measurement, allnon magnetic coating thickness (such as paint, powder coating, plastic, zinc, copper, tin and nickel). Rapid measurement, accurate, nondestructive, for more than thirty years, MICROTEST has become a widely usedautomatic measurement of coating thickness instrument.Germany's "trick" it in the aspects of technology andprecision, has the highest level of magnetic coatingthickness gauge.
All products meet the DIN, ISO and ASTM standard.MIKROTEST fully automatic operation. Has the followingcharacteristics There is nothing comparable to this in use:
1 automatic measurement not misoperation
2 easy to master and with high accuracy
3 no calibration, setting, simple detection
4 do not need a battery or other power supply
5 automatic reporting thickness readings
6 nondestructive measuring head, a point determination
7 metal clad is suitable for outdoor use frequent operation
8 mechanical shock resistance, acid and solventcorrosion
9 balance device to eliminate the influence of gravity, can be accurately measured in any direction and tube.
Type number
Measuring range
Reading accuracy
The minimum measurement area
Diameter
Minimum radius
Convex concave
Mm mm
The matrix minimum
The thickness of MM
The most suitable for the
MIKROTEST G 6
Between zero and one hundred mu m
1 μ m or 5% reading
20mm
525
0.5
Steel plating, paint, enamel, plastic, rubber layer
MIKROTEST F 6
01000 μ
5 μ m or 5% reading
30mm
825
0.5
MIKROTEST 6 S3
0.23mm
5% read value
30mm
1525
1
MIKROTEST 6 S5
0.55mm
5% read value
50mm
1525
1
MIKROTEST 6 S10
2.510mm
5% read value
50mm
1525
2
MIKROTEST 6 S20
7.520mm
5% read value
1000mm
100150
7
MIKROTEST 6 Ni50
0- 50 μ
1 μ m+5% reading
15mm
525
-
Non iron substrate plating
MIKROTEST 6 Ni100
0- 100 μ
MIKROTEST NIFE50
050 μ
2 μ m + 8% reading
20mm
1025
0.5
Iron nickel plating
From the table can choose the most suitable models of MIKROTEST solve your problems. MIKROTEST is easy to operate, measurement only forward rotation to turn rodend, will probe in the measurement area, loosen the self-locking mechanism, to start the automatic measurement.After the MIKROTEST lock, can be directly on the scaleshows the correct value of the thickness of the coating,the unit m or mm. According to the operation instructions,MIKROTEST uninterrupted use for many years, for you to carry out quality control.
