臺灣七泰5601電阻計

臺灣七泰5601電阻計

取樣速度：每秒10次

顯示5位：七段顯示器高14.2mm

溢位指示:"00000"閃爍

自動換檔和手動換檔選擇

超載保護:AC300Vrms

工作電壓:AC90V-264V 50/60Hz＜15VA

工作溫度范圍:0～50℃(32～122℉), RH≦80%

RS-232: Baud rate 300, 2400, 9600三種No parity, One stop bit.

機身: 248mmL×93mmH×295mmD

FEATURES
‧Maximum Display of 33000 ‧Power Supply AC90V～260V, 50/60Hz ‧Wide Measurement range: From 10μΩ resolution to 30MΩ full scale ‧High accuracy ±0.05% ‧Auto/Manual Function ‧RS-232 Interface standard ‧Measurement Speed 10 samples/sec. ‧HOLD, REL Function
5601 Specifications	RANGES
Maximum Display: 33000 Sampling Rate: 10 samples/sec. Display: 6-digit, 7-segment LED 14.2mm High Over Indication: "00000" flash Range Selection: Automatic and Manual Overload Protection: AC330Vrms Power Supply: AC90V～264V, 50/60Hz＜15VA Operating temperature: 0～50℃ (32～122℉), RH≦80% RS-232: Baud rate 300, 2400, 9600 No parity, One stop bit. Dimension: 248mmL×93mmH×295mmD	Range Text Range Resolution Text Current Accuracy 300mΩ 10uΩ~330.00mΩ 10uΩ DC 100mA ±0.05％ ±20 digit 3Ω 10uΩ~3.3000Ω 10uΩ DC 100mA ±0.02％ ±10 digit 30Ω 1mΩ~33.000Ω 1mΩ DC 100mA 300Ω 10mΩ~330.00Ω 10mΩ DC 10mA 3KΩ 100mΩ~3.3000KΩ 100mΩ DC 1mA 30KΩ 1Ω~33.000KΩ 1Ω DC 1mA 300KΩ 10Ω~330.00kΩ 10Ω DC 10uA 3MΩ 100Ω~3.3000MΩ 100Ω DC 1uA 30MΩ 1KΩ~33.000MΩ 1KΩ DC 100mA ±0.05％ ±20 digit
SECTION OPERATION
1. Range selection The 5601digital ohm meter has two range modes: Manual and Auto range. Measurement range can be selected using either auto range (pressing the-Auto button) or manual range (pressing the ▲or▼button). In autorange, the ohm meter higher range when the reading is at full scale 30000 counts, and lower range when the rending below 9% of full scale 2700 counts, while the instrument changes range. The auto range up to the hightest range 30M ohms, down to the 300m ohms. Resistance measurements from 10μ ohms to 30M ohms in 9 range: 300m ohms, 3 ohms, 30 ohms, 300 ohms, 3K ohms, 30K ohms, 300K ohms, 3M ohms, 30M ohms. 2. HOLD Modifier The 5601 is operating in a display hold mode, the Hold modifier allows you to take a measurement and "hold" that measurement on the display. 3. Four-Wire Measurement The 5601 makes 4 wire ohms measurements as known in Figure 1. The source HI and LO leads apply a known, internal current source to the unknown resistance, the voltage drop across the unknown resistance.
Figure 1

FEATURES
‧Maximum Display of 33000 ‧Power Supply AC90V～260V, 50/60Hz ‧Wide Measurement range: From 10μΩ resolution to 30MΩ full scale ‧High accuracy ±0.05% ‧Auto/Manual Function ‧RS-232 Interface standard ‧Measurement Speed 10 samples/sec. ‧HOLD, REL Function
5601 Specifications	RANGES
Maximum Display: 33000 Sampling Rate: 10 samples/sec. Display: 6-digit, 7-segment LED 14.2mm High Over Indication: "00000" flash Range Selection: Automatic and Manual Overload Protection: AC330Vrms Power Supply: AC90V～264V, 50/60Hz＜15VA Operating temperature: 0～50℃ (32～122℉), RH≦80% RS-232: Baud rate 300, 2400, 9600 No parity, One stop bit. Dimension: 248mmL×93mmH×295mmD	Range Text Range Resolution Text Current Accuracy 300mΩ 10uΩ~330.00mΩ 10uΩ DC 100mA ±0.05％ ±20 digit 3Ω 10uΩ~3.3000Ω 10uΩ DC 100mA ±0.02％ ±10 digit 30Ω 1mΩ~33.000Ω 1mΩ DC 100mA 300Ω 10mΩ~330.00Ω 10mΩ DC 10mA 3KΩ 100mΩ~3.3000KΩ 100mΩ DC 1mA 30KΩ 1Ω~33.000KΩ 1Ω DC 1mA 300KΩ 10Ω~330.00kΩ 10Ω DC 10uA 3MΩ 100Ω~3.3000MΩ 100Ω DC 1uA 30MΩ 1KΩ~33.000MΩ 1KΩ DC 100mA ±0.05％ ±20 digit
SECTION OPERATION
1. Range selection The 5601digital ohm meter has two range modes: Manual and Auto range. Measurement range can be selected using either auto range (pressing the-Auto button) or manual range (pressing the ▲or▼button). In autorange, the ohm meter higher range when the reading is at full scale 30000 counts, and lower range when the rending below 9% of full scale 2700 counts, while the instrument changes range. The auto range up to the hightest range 30M ohms, down to the 300m ohms. Resistance measurements from 10μ ohms to 30M ohms in 9 range: 300m ohms, 3 ohms, 30 ohms, 300 ohms, 3K ohms, 30K ohms, 300K ohms, 3M ohms, 30M ohms. 2. HOLD Modifier The 5601 is operating in a display hold mode, the Hold modifier allows you to take a measurement and "hold" that measurement on the display. 3. Four-Wire Measurement The 5601 makes 4 wire ohms measurements as known in Figure 1. The source HI and LO leads apply a known, internal current source to the unknown resistance, the voltage drop across the unknown resistance.
Figure 1