- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
3159日本日置HIOKI 3159自動絕緣/耐壓測試儀
|
單臺儀器進行絕緣及耐壓測試 |
|
|
|
|
|
|
基本參數 : 耐壓測試 |
|
|
|
||||||||||
|
|
|
基本參數 : 絕緣測試 |
|
|
|
||||
|
|
|
基本參數 |
|
|
|
3158 HIOKI HIOKI 3158 AC withstand voltage tester
Simple realization of the various safety standards based test
To adapt to a variety of safety standard test (5kV/500VA)
The current comparator, with acceptance and timing functions
You can save up to 20 in line with various standards and regulationsstipulated test condition
Incidental error settings for the test voltage and hindering the testvoltage comparator function
Because the test voltage at zero cross point ON/OFF, real-timeinspection machine is not suitable, also can prevent damage inspectionmachine
Basic parameters
Measuring function
The withstand voltage test
Measure voltage
0 ~ 2.5kV/0 ~ 5.0kV AC, two bands.
A voltage mode
Zero switch
Transformer capacity
500VA (maximum 30 minutes)
Voltage adjustment
Manually adjustable transformer
Waveform
The same power waveform
Frequency
With the power supply frequency
Measurement items
AC voltage: 0 ~ 5kV (adjusted average value, effective value display)
AC current: 0.01 ~ 120mA (adjusted average value, effective valuedisplay)
Judging function
Content: ultra high limit failure / by / ultra low limit failure
(Digital settings window comparison)
Timing function
The set range: 0.5 ~ 999 seconds
Interface
EXT I/O, EXT SW, RS-232C
Display
Fluorescent display (digital), analog pointer
Monitoring function
The output voltage, current sensing
Power supply
120V AC, 50/60Hz, (313159 HIOKI HIOKI 3159 automatic insulation /pressure tester
Insulation and withstand voltage test of a single instrument
Insulation resistance test (DC500V/1000V)
Pressure test (AC5000V)
Series of tests (from the insulation resistance test to test)
Standard interface (external I/O, an external switch, RS-232C, state output)
The basic parameters: voltage withstand test
The test voltage
AC 0 ~ 2.5kV/0 ~ 5.0kV dual range configuration (average, effectivevalue display) 500VA (up to 30 minutes)
Voltage setting method
Manual settings
Waveform
The same power waveform
Frequency
With the power supply frequency
Measuring range
Current: 0.01 ~ 120mA, ± (3%f.s.+20 μ A) 2mA/8mA /32mA /120mA
AC (average value, effective value display)
The basic parameters: insulation test
The test voltage
DC500V/1000V
Measuring range
2M Ω 2000M Ω (500V), 4M Ω 2000M Ω ~ (10
Basic parameters
Judging function
Project: ultra high limit - no pass / pass / ultra low limit - unqualified(digital set window comparison method)
Timer
Set the range: 0.5 ~ 999s
The external interface
External I/O, an external switch, RS-232C
Display
Digital fluorescent tube display, analog pointer
Monitoring function
The output voltage, current sensing, insulation voltage
Power supply
120V AC, 50/60Hz, (3159-01)
220V AC, 50/60Hz, (3159-02)
230V AC, 50/60Hz, (3159-03)
240V AC, 50/60Hz, (3159-04)
Volume and weight
320 wide by 155 high x 330 thick mm, 18kg ~ 21.5kg
Annex
High voltage test line 9615 (high voltage side and loop 1), power line (1),a spare fuse (1)
58-01)
220V AC, 50/60Hz, (3158-03)
230V AC, 50/60Hz, (3158-04)
240V AC, 50/60Hz, (3158-05)
Volume and weight
320 wide by 155 high x 263 thick mm, 16KG (3158-01) 18kg (3158-03,04,05)
Annex
High voltage test line 9615 (high voltage side and loop 1), power line (1),a spare fuse (1)
