- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
3541日本日置HIOKI 3541電阻計@3541%
|
寬量程、高分辨率、適用于系統測試的電阻計 |
|
|
|
|
|
|
基本參數 |
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||
3541 HIOKI HIOKI 3541 meter @3541%
Resistance of wide range, high resolution, suitable for system testing.
A wide range of measuring a minimum of 0.1 μ Ω (20.00m Ω), the highest 11
Fast sampling, the fastest can reach 0.6ms (* according to setconditions, there will be differences)
Correction of bias voltage, 9451 (Pt) / temperature probe for temperaturecompensation function
Using 4 terminal measuring technique, test line negligible contact resistance
Have statistics, calculus function. If the other option 9670, can achieve the printing function.
Basic parameters
Measurement of current
20m/200m Ω, 2/20/200/2k/20k/100k Ω, 1M/10M/100M Ω, the minimum resolution: 0.1 μ Ω, in slow gear mode: 2/20/200/2k Ω, the minimum resolution: 10
Display
20m ～ 20K Ω, maximum display 200000, 100k ～ 100M Ω, maximum display 110000, LED displ
Precision
(SLOW2) ± 0.007% rdg. ± 0.0015%dgt. (2k/20k Ω)
In the slow block mode: rdg. ± 0.01%dgt. ± 0.011% (2 ～ 2K Ω)
Measurement of current
DC 1A ~ 100nA, in the slow block mode: DC 10m ～ 10 μ
The open circuit voltage
DC 5V (20/200m), 2.6V (2 ~ 20k), 13V (1M ~ 100M), in the slow blockmode: 60mV
Sampling rate
Fast
Medium speed
Low speed 1
Low speed 2
50Hz
0.6ms + 0.3ms
21ms + 1ms
155ms + 5ms
455ms + 10ms
60Hz
0.6ms + 0.3ms
17ms + 1ms
149ms + 5ms
449ms + 10ms
Response time (pure resistance): note on the sampling time is about 1ms(+ set according to different content, sample, there will be differences)
Measurement of temperature
(9451) －10.0 ° C to 99.9 ° C (39.9 ° C: －10.0 ~ + 0.45% rdg. ± 0.8 ° C, 40 ° C: to 99.9 ° ± 0.45% rdg. ± 1.5 ° C)
Temperature compensation function
Any temperature (9451 or temperature probe),? Any material can makethe resistance value conversion (compensation temperature range －10.0 ～ 99.9 ° C)
Temperature conversion function
With due to ambient temperature, winding resistance value, and coilingtemperature rise due to numerical conversion function.
Other functions
Comparator, can store 30 kinds of conditions of loading, classification(BIN) measurements (10 categories), statistical calculation, correcting the bias voltage, delay, average
The number of input / output
Output: BCD, measured at the end, comparator results, BIN results, open NG/ connector input: setting conditions, trigger, calibration, 0ADJ,printing /C-MOS
Power supply
AC 100 ~ 240V, 50/60Hz, 30VA max.
Volume to weight
215 wide by 80 high x 295 mm thick, 2.6kg
Annex
Clip type test line of 9287 × 1, 9451 × 1 temperature probes, power line x1, x 1 EXT fuse, I/O plug-in connector x 1
