- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
3535日本日置HIOKI 3535LCR測試儀
|
高速LCR儀，采樣率可高至120MHz |
|
|
|
|
|
|
不能單獨使用, 測量時需要選擇前置放大器單元和測試冶具或探頭。 |
|
基本參數 |
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3535 HIOKI HIOKI 3535LCR tester
High speed LCR instrument, the sampling rate can be up to 120MHz
Broadband 100kHz ~ 120MHz band
High speed LCR test (6ms/ sampling)
Detachable preamplifier can choose
Load compensation function to provide compensation standard of comparison elements "
Can not be used alone, the measurement is necessary to select apreamplifier unit and test fixture or probe.
The input probe / test fixture, entity without. Measured in accordance with the purposes, different models have different probe / test fixture.
Basic parameters
Measurement parameters
|Z|, |Y|, Q, Rp, Rs (ESR), G, X, B, θ, Ls, Lp, Cs, Cp, D (Tan
The preamplifier
The measuring range is determined
The preamplifier
9700-01
9700-02
9700-03
Z and R
100m ohm to 1K ohm
500 ohm to 10K ohm
5K ohm to 100k ohm
C
1.33pF ~ 15.9 μ
0.133pF to 3.18nF
0.1pF to 318pF
L
1nH to 1.59mH
663nH to 15.9mH
6.63 μ H ~ 159m
Theta
-180.00 °～ 180 °
Frequency measurement
Range
100kHz to 120MHz
The resolution settings
4 (before using the control panel settings)
100.0kHz to 1.000MHz
100Hz amplitude
1.000MHz to 10.00MHz
1kHz amplitude
10.00MHz to 100.0MHz
10kHz amplitude
100.0MHz to 120.0MHz
100kHz amplitude
Use the GP-IB or RS-232C interface, 1Hz resolution.
Precision
Maximum ± 0.005%, relative to the set value
Level measuring
The open circuit voltage (V)
And a constant voltage (CV) mode
5mV ~ 1V, the maximum 20mA (10.000MHz)
5mV ~ 500mV, the maximum 10mA (10.01MHz above)
Resolution
1mV amplitude
Precision
± (5%+5mV) × (2+log f) (f MHz)
Constant current (CC) mode
200 μ A ~ 20mA, the maximum 1V (10.00MHz
200 μ A ~ 10mA, the maximum 0.5V (10.01MHz above
Resolution
10A amplitude
Precision
± (10%+50 μ A) * (2+log f) (f MHz)
Basic accuracy
Z: 0.5%rdg. θ: ± 0.3 ° ±
Output impedance
50 ± 10 (100kHz)
Monitor
Voltage 0.000V ~ 1.000V
Current 0.000mA to 20.0mA
Limit
Voltage (set to CC) 0.005V ~ 1.000V
Current (set to V or CV) 0.20mA ~ 20.00mA
Average
Guan, 2, 4, 8, 16, 32, 64
The trigger
The built-in trigger, an external trigger
Trigger delay 0.01s ~ 9.99s; 0.01s resolution
Comparison
Get two measurement parameters:%, △%, or absolute value (△%showed that the error of measured value and standard value)
Control of disk storage and call
A maximum of 30 groups
Screen display
The measured value and the comparator
Display line numbers
Can be set to 3, 4, or 5; according to the parameters may be different
Copy of the measured values or screen display (using 94429593-01 and 9446)
Interface
GP-IB, RS-232C, EXT.I/O (standard)
Operating environment
10 ~ 40 ° C, maximum 80%rh, no condensation
Storage environment
-10 ~ 55 ° C, maximum 80%rh, no condensation
Power supply
The exchange of 100V ~ 240V, 50/60Hz, 50VA
Volume and weight
About 360 wide by 130 high x 360 thick (mm); 8.3kg
