- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
CA6547絕緣電阻測試儀@CA6547%
CA6547 5kV絕緣電阻測試儀，可設置自動測量，并自動計算和顯示DAR、PI、DD等測量指標。在測量過程中，可切換顯示測試電壓、絕緣電阻以及漏電流；測量結束后，可切換顯示被測物的電容及放電電壓。CA6547采用高規格安全理念設計，可經由內部充電電池，或外部AC電源輸入進行測量操作。儀器配備RS-232通訊接口，可通過PC對其進行組態或運行操作；另可使用DataView®分析軟件（選購），將測量結果自動生成報表，并通過打印機打印輸出。
產品應用：
技術參數：
|
測量 |
|
|
絕緣電阻 |
固定測試電壓：500/1,000/2,500/5,000 V 可調測試電壓：40V ~ 5,100V (以10V或100V遞增) 測量范圍： 500V：10kΩ ~ 2 TΩ 1,000V：10kΩ ~ 4 TΩ 2,500V：10kΩ ~ 10 TΩ 5,000V：10kΩ ~ 10 TΩ |
|
電壓 |
1 至 5,100V (15Hz 至 500Hz 或DC) |
|
電容 |
0.005至 4.999μF |
|
泄漏電流 |
0.000nA 至 3,000μA |
|
功能 |
|
|
顯示屏 |
大型LCD |
|
背光 |
有 |
|
可組態設置告警 |
有 |
|
平滑顯示 |
有 |
|
可組態設置時間 |
有 |
|
計算參數 |
DAR(電介質吸收比)-PI(極化指數)及DD(電介質放電指數) |
|
鎖定測試電壓 |
有 |
|
R(t) |
記錄采樣點 |
|
數據存儲內存 |
128 kB |
|
通訊接口 |
RS 232 |
|
直接打印結果 |
透過串行或并行打印機 |
|
PC軟件 |
DataView®（選購） |
|
電源 |
可充電鎳氫電池（9.6V – 3.5 AH NiMH） |
|
電池壽命 |
30天，每天10次DAR 和5次PI測試 |
|
電氣安規 |
IEC 61010-1 （Cat. III 1,000V 或 Cat. I 2,500V） 及IEC 61557 |
|
外型尺寸 |
270 x 250 x 180 mm |
|
重量 |
4.3 kg |
CA6547 insulation resistance tester @CA6547%
CA6547 5kV insulation resistance tester, automaticmeasurement, and automatic calculation and display DAR, PI, DD and other measure. During the measurement, the test voltage, insulation resistance and leakage current switch display; after measurement, canswitch to display the capacitor and the discharge voltagemeasured object. CA6547 is adopted to design the high standard of safety concept, through internal rechargeable battery, or the external AC power supply input formeasuring operation. The instrument is equipped withRS-232 communication interface, can be carried out through the PC configuration or operation on it; anotheranalysis software using DataView ® (optional), the measured results of automatic report generation, and through the printer to print output.
Product features:
Fixed test voltage shift: 500V, 1000V, 2500V and 5000V
Self configuration setting the test voltage (40 to 5100V)
Measuring insulation resistance: 30K ohm to 10T ohm
Automatic calculation of DAR, PI and DD values
Direct measurement and display the capacitance and leakage current
Can display the value of insulation resistance, test voltage and test time
Can be set to measure time and PI time
With smooth display and alarm function
If the measured voltage is higher than 25V, automatic banmeasurement
Automatic discharge and discharge voltage
Large LCD screen, dual line display time, voltage and measuring results
Strong shield
With RS-232 communication interface, support externalserial printer (optional) directly print measurement results
128kB memory, can store data
Via the PC remote control (optional DataView)
Product application:
Measuring cable, transformer, electric motor, generatorinsulation and winding insulation etc.
High resistance or high absorption test
Single point test
The timing measurement
Absorption ratio (DAR) and polarization index (PI) test
Insulated cable test multilayer (DD)
Old equipment long time operation
Measure the insulation resistance of motor
Computer controlled production line testing
Preventive maintenance, via the PC store measurementdata and trend analysis
On the basis of the measurement requirements, user test voltage measuring insulation resistance
Technical parameters:
Measurement
Insulation resistance
Fixed the test voltage: 500/1000/2500/5000 V
Adjustable test voltage: 40V ~ 5100V (increased by 10Vor 100V)
Measuring range:
500V:10k Ω ~ 2
1000V:10k Ω ~ 4
2500V:10k Ω ~ 10
5000V:10k Ω ~ 10
Voltage
1 to 5100V (15Hz to 500Hz or DC)
Capacitance
From 0.005 to 4.999 μ
Leakage current
0.000nA to 3000 μ
Function
Display
Large LCD
Backlight
Yes
Configurable set alarm
Yes
Smoothing
Yes
Configurable set time
Yes
Calculation parameters
DAR (dielectric absorption ratio) -PI (polarization index)and DD (dielectric barrier discharge index)
Locking test voltage
Yes
R (T)
Record the sampling point
Data storage memory
128 kB
Communication interface
RS 232
Direct print results
Through the serial or parallel printer
PC software
DataView ® (optional)
Power Supply
Rechargeable nickel metal hydride batteries (9.6V – 3.5AH NiMH)
Battery life
The 30 day, 10 times a day and 5 PI test DAR
Electrical safety
IEC 61010-1 (Cat. III 1000V or Cat. I 2500V) and IEC 61557
Appearance size
270 x 250 x 180 mm
Weight
4.3 kg
