Protek 9216A(基本精度0.05%)數字LCR表@92%

Protek 9216A(基本精度0.05%)數字LCR表@92%

Protek 9216A (basic accuracy 0.05%) digital LCR table @92%

Characteristic

0.05% basic precision

The 5 test frequency selection

Set the test conditions and the 9 set state, memory function

The use of RS - 232C and GPIB/Handler (accessories)field

Convenient determination

Used

Technical specifications

Automatic measurement mode, R+Q, L+Q, C+D, C+R

Equivalent circuit of series, parallel

To display the parameters measurement deviation,percent bias, BIN digital

Deviation and deviation is the same internal storage%value calculation results.

The average measured average 2~10 measurements

Measuring range of R+Q R 0.0001 Ω 2000M Ω Q ~ 0.00001~

L+Q L 0.0001uH ~ 99999H Q 0.00001~50

C+D C 0.0001pF ~ 99999uF D 0.00001~10

C+R C 0.0001pF ~ 99999uF R 0.00001~99999K

To measure the frequency of 100Hz, 120Hz, 1KHz,100KHz

The frequency accuracy of ± 100ppm

The driving voltage of 0.1V, 0.25V, 1Vrms

Drive level accuracy of ± 2%

The measurement rate is slow, fast, in

In more than 1KHz test frequencies per measuring 2, 10or 20 times per second, under 100Hz 0.6, 2.4, or 6 times

Range automatic or manual

Control of continuous, manually or with RS232C, GPIB excuse for external control

The bias voltage is -2.0VDC ± 2% ° C 0 to +40 - VDC (@0.25A fuse)

Necessary conditions for at least 30 minutes warm-up ± 5 ° C, 23 ° C

The basic accuracy of 0.05%