- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
MIT40X絕緣電阻測試儀 MIT40X @MIT40X%
|
||
|
產品功能描述 |
|
|
|
|
|
|
產品持有證書：
CE
MIT40X insulation resistance tester MIT40X @MIT40X%
Product features:
▲ test voltage: 10~100V variable
▲ test resistance: 2G~20G
▲ circuit voltage warning: 50V
▲ short-circuit current 2mA
▲ can true effective value of RMSAC600V measurement
▲ dual display of digital and analog
▲ leakage current display
▲ limit alarm function
Product features:
▲ MIT40X within 10V~100V to 1V as a unit to fine tune the insulation test voltage, also can set the corresponding test procedures need
Special standard voltage, and provides different industry needs such as: 10V, 55V, 50V, 65V, 90V
▲ test results can be converted to each other in theinsulation resistance and leakage current
▲ conductivity testing in accordance with international standards (200mA), (the current is set to 20mA to extend battery), in the rotary switch
For the transfer of conduction testing, automatic test, do not need to press the test button (resolution 0.01 ohm)
The scope of ▲ test line is 0~9.99 ohms (to eliminatelead error) instrument capable of automatic zero adjustment
▲ the products suitable for the application in the:
Detection of airborne electronic equipments, insulation maintenance commercial aircraft interior equipment
Insulation maintenance base in communication equipment, ships, aircraft and other equipment
Insulation test, PCB test and other electronic components
▲ this new insulation and continuity testing instrument integrated testing technology is now the most advanced
▲ the ergonomic design makes the instrument is compact, comfortable grip in the hand
▲ design conforms to the international IEC1010-2 standard. Have certain waterproof function
All operating ▲ instruments are very simple, so thefunction through the range selector switch to choose, anddisplay the button below to
Operation
▲ display is a large, can display three and a half digitalLCD display and simulation display
▲ mainly test information display in large numbers, theleakage current, insulation resistance or voltageinformation is displayed in the display screen
The right lower leg
Product application:
The MIT400 series eight instruments, these eightinstruments can be divided into the following three categories:
Industrial application of MIT400, MIT410, MIT420,MIT430
Telecom Application MIT480, MIT481, MIT485
The special application of MIT40X
Descrtption of product features
Product specifications:
Insulation resistance: 2~20G
Full range of corresponding accuracy
100V ± 3% ± 2 digit ± 2.0%/G
50V ± 3% ± 2 digit ± 4.0%/G
10V ± 3% ± 2 digit ± 2.0%/100M
Simulation shows that the accuracy of the full range of 1G
Leakage current accuracy: 10% ± 3 digit
Voltage display accuracy: 3% ± 3 digits + 0.5%
Continuous conduction test:
The open circuit voltage: 5V ± 1V
The test current: 200mA (-0mA~+20mA) 0.01 euro ~99.9;20mA (+ 1mA) 10 euro ~99.9
Test line zero: 0.10 Euro
Buzz: can set the lower limit of 1 in Europe, 2 in Europe, 5 in Europe, 10 in Europe, 20 in Europe
Short circuit current: 20 µ A ± 5 µ A
Voltage detection range:
0~600VDC ± 2% ± 2 digit
10Mv~600VTRMS true effective value (40~400Hz) ± 2%± 2 digit
0~1000V simulations show
The default voltage meter: 25VAC/DC in any file
Frequency: 40~450Hz
Accuracy: ± 0.3% ± 1 digit (40~99.9Hz) ± 0.5% ± 1 digit (100~450Hz)
Equipment safety standards
In line with the international IEC 6100-1 safety standards(1995), CATIIV600V
EMC standard: IEC61326
Instrument power supply
5X1.5VAA alkaline dry battery
Products of other technical indicators:
Dimensions: 220 x 92 x 50mm
A carrying case: 456 x 178 x 89mm
Weight: about 590g with box: about 1.75Kg
Working temperature: -10 ℃ to +55 ℃
Humidity: 90%RH
Storage temperature: -20 ℃ to +70 ℃
The maximum height: 2000 meters
Factory calibration temperature: 20 ℃
Protection grade: IP54 waterproof and dust
Standard configuration:
The instrument host, high strength silicone tester,portable suitcase, the original factory calibration certificate, the CD (
With software).
Product certificate:
CE
