- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
TT230涂層測厚儀Coating thickness gauge
本儀器是一種超小型測量儀，它能快速、無損傷、精密地進行非磁性金屬基體上非導電覆蓋層厚度測量。可廣泛用于制造業、金屬加工業、化工業、商檢等檢測領域。由于該儀器體積小、測頭與儀器一體化，特別適用于工程現場測量。功能特點：
本儀器采用了渦流測厚法，可無損傷地測量非磁性金屬基體上非導電覆蓋層的厚度（如銅、鋁、鋅、錫等基底上的琺瑯、橡膠、油漆鍍層）
可進行零點校準及二點校準，并可用基本校準法對測頭的系統誤差進行修正；
具有兩種測量方式：連續測量方式（CONTINUE）和單次測量方式（SINGLE）；
具有兩種工作方式：直接方式(DIRECT)和成組方式(Appl)
具有刪除功能：對測量中出現的單個可疑數據進行刪除，也可刪除存貯區內的所有數據，以便進行新的測量；
設有五個統計量：平均值（MEAN）、最大值（MAX）、最小值（MIN）、測試次數（NO．）、標準偏差（S．DEV）；
具有米、英制轉換功能；
具有打印功能，可打印測量值、統計值；
具有欠壓指示功能；
操作過程有蜂鳴聲提示；
具有錯誤提示功能；
具有自動關機功能。
技術參數：
|
測頭類型 |
N |
|
|
測量原理 |
電渦流 |
|
|
測量范圍 |
0-1250um/0-40um(銅上鍍鉻) |
|
|
低限分辨力 |
1µm(10um以下為0.1um) |
|
|
探頭連接方式 |
一體化 |
|
|
示值誤差 |
一點校準(um) |
±[3%H+1.5] |
|
兩點校準(um) |
±[（1%~3%）H+1.5] |
|
|
測量條件 |
最小曲率半徑(mm) |
凸3 凹10 |
|
基體最小面積的直徑(mm) |
ф5 |
|
|
最小臨界厚度(mm) |
0.3 |
|
|
溫濕度 |
0~40℃ |
|
|
統計功能 |
平均值（MEAN）、最大值（MAX）、最小值（MIN）、 |
|
|
工作方式 |
直接方式(DIRECT)和成組方式(Appl) |
|
|
測量方式 |
連續測量方式（CONTINUE）和單次測量方式（SINGLE） |
|
|
上下限設置 |
無 |
|
|
存儲能力 |
15 個測量值 |
|
|
打印/連接計算機 |
可選配打印機/不能連接電腦 |
|
|
關機方式 |
自動 |
|
|
電源 |
二節3.6V鎳鎘電池 |
|
|
外形尺寸 |
150×55.5×23mm |
|
|
重量 |
150g |
|
基本配置：主機 標準片一套（50um 100um 200um 500um 1000um） 鋁基體 充電器
可用附件： TA230打印機
TT230 coating thickness tester Coating thickness gauge
This instrument is a super small measuring instrument, it can fast, no damage, precision of non magnetic metal non conductive cover layer thickness measurement. Can be widely used in manufacturing industry, metal processing industry, chemical industry, commodity inspection and testing field. Due to the small size of the apparatus, probe and instrument integration, especially suitable for field engineering measurement.
This instrument meets the following criteria:
GB/T 4957 - 1985 of non magnetic metal non conductive cover layer thickness measurement of eddy currentmethod
JB/T 8393 - 1996 magnetic and eddy current measuring instrument for coating thickness
JJG 818 - 93 "eddy current thickness measuring instrument"
Function characteristics:
This instrument adopts eddy current thickness method,can be nondestructively measuring non-conductive coverlayer thickness of the non magnetic metal (such ascopper, aluminum, zinc, tin and other substrate enamel,rubber, paint coatings)
For zero calibration and two point calibration, systemerrors on the measuring head and available basic calibration method was modified;
With two measurement mode: continuous measurement of mode (CONTINUE) and single measurement(SINGLE);
Has two operation modes: direct mode (DIRECT) andburst mode (Appl)
Has a delete function: single suspicious datameasurements appear to delete, can also delete all data within the storage area, in order to carry out new measure;
With five statistics: Average (MEAN) (MAX), maximum value, minimum value (MIN), the number of tests (NO.),standard deviation (S.DEV);
With meters, metric conversion function;
With print function, print measurement, statistical value;
Has undervoltage indication function;
Operation beep prompt;
With error function;
With automatic shutdown function.
Technical parameters:
Probe type
N
The measuring principle
Eddy current
Measuring range
0-1250um/0-40um (copper chrome)
The lower limit of resolution
1 µ m (10um 0.1um)
Probe connection
Integrated
Error of indication
One point calibration (UM)
± [3%H+1.5]
A two-point calibration (UM)
+ [(1%~3%) H+1.5]
Measuring conditions
The minimum radius of curvature (mm)
Convex concave 10 3
The minimum area of base diameter (mm)
Phi 5
The minimum critical thickness (mm)
0.3
Temperature and humidity
0~40 ℃
20%RH to 90%RH
Statistical function
The average value (MEAN), maximum value, minimum value (MAX) (MIN),
The number of tests (NO.), standard deviation (S.DEV)
Working mode
The direct mode (DIRECT) and burst mode (Appl)
Measuring mode
Continuous measurement of mode (CONTINUE) andsingle measurement (SINGLE)
Limit set
No
Storage capacity
15 measurements
Print / connected computer
Optional printer / cannot connect computer
Shutdown mode
Automatic
Power Supply
The two section 3.6V nickel cadmium battery
Size and shape
150 x 55.5 x 23mm
Weight
150g
The basic configuration: host standard piece a (50um100um 200um 500um 1000um) aluminum matrix charger
Available accessories: TA230 printer
