- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
TR220手持式粗糙度儀Roughness tester
該儀器適用于生產現場，科研實驗室和工廠計量室。可測量多種機加工零件的表面粗糙度，根據選定的測量條件計算相應的參數，在液晶顯示器上清晰地顯示全部測量結果及圖形，并可在打印機上輸出，亦可與PC機進行通訊。具有測值存儲及存儲數據查詢功能。功能特點：
● 高精度電感傳感器；
● 可測量顯示19個粗糙度參數；
● 采用DSP(數字信號處理器)進行數據處理和控制，速度快，功耗低；
● 高品質鋰離子充電電池，容量高，無記憶效應，連續工作大于20小時；
● 連接時代TA220S打印機，可以打印測量參數及輪廓圖形；
● 標準RS232接口，可與PC機通訊；
● 中英文菜單式操作界面；
● LCD圖形顯示功能；
● 傳感器觸針位置指示；
● 帶存儲功能的自動關機；
● 帶有測值存儲功能及存儲數據查詢功能；
● 帶有系統自檢功能；
● 可自定義系統時鐘，開機時顯示當前時鐘，存儲測量值時顯示時間；
● 可測量Rk參數及顯示Rk曲線圖。
技術參數：
|
測量參數 |
Ra、Rz（ISO）、Ry、Rq、Rt、Rp、Rv、Rz（JIS）、Rmax、 |
|
測量范圍 |
Ra:0.025-12.5μm |
|
顯示范圍 |
Ra、Rq：0.005-16μm，Rz、Ry、Rt、Rp、Rv、Rmax、R3z、 |
|
量程范圍 |
±20μm、±40μm、±80μm |
|
最高顯示分辨率 |
0.001μm |
|
濾波方式 |
RC、PC-RC、GAUSS、D-P |
|
取樣長度 |
0.25mm、0.8mm、2.5mm、自動 |
|
評定長度 |
1L-5L（可選），L為取樣長度 |
|
測量行程長度 |
3L-7L（可選） |
|
最大驅動行程長度 |
17.5mm/0.71inch |
|
最小驅動行程長度 |
1.3mm/0.052inch |
|
示值誤差 |
≤±10％ |
|
示值變動性 |
≤6％ |
|
針尖角度 |
90° |
|
顯示方式 |
128×64點陣液晶（帶背光） |
|
工作環境 |
溫度：0ºC- 40ºC，相對濕度：＜90% |
|
重量 |
440g |
|
外型尺寸 |
140×52×48mm |
基本配置：主機、TS100標準傳感器、電源適配器、多刻線樣板、傳感器護套、支架
可選附件：
TS110曲面傳感器 、TS120小孔傳感器、TS130溝槽傳感器、TS131深槽傳感器、TA610測量平臺、TA620測量平臺、TA630微調平臺、TA631微調平臺、TA230微型打印機、側向轉接桿、接長桿、V型塊、連接體部件、驅動器連接軸、PC軟件
TR220 handheld roughness tester Roughness tester
The instrument is suitable for the production site,research laboratories and factories measuring room.Various machine parts can be measured surfaceroughness, calculate the corresponding parameters according to the selected measurement conditions,clearly show that all measurement results and graphics in the liquid crystal display, and print it on a printer, can alsocommunicate with PC. With the measured value is storedand the stored data query.
Function characteristics:
● high precision inductance sensor;
● can measure 19 roughness parameter display;
● using DSP (digital signal processor) for data processing and control, high speed, low power consumption;
● high-quality lithium ion rechargeable battery, high capacity, no memory effect, more than 20 hours of continuous work;
● connected age TA220S printer, you can print themeasurement parameters and the contour;
The standard RS232 interface, can be in communication with the PC machine;
● in English menu operation interface;
● LCD graphic display function;
● sensor needle position indicator;
Automatic shutdown, with memory function;
● with the measured value is stored and the stored data query;
● with self checking function;
● can customize the system clock, display the currentclock boot, storage measurement value display time;
● Rk parameter measurement and display Rk curves.
Technical parameters:
Measurement parameters
Ra, Rz (ISO), Ry, Rq, Rt, Rp, Rv, Rz (JIS), Rmax,
R3z, RSk, RS, RSm, RPc, Rk, Rpk, Rvk, Mr1, Mr2
Measuring range
Ra:0.025-12.5 μ
Display range
Ra, Rq:0.005-16 μ m, Rz, Ry, Rt, Rp, Rv, Rmax, R3z
Rz (JIS): 0.02-160 μ m, RS, RSm:1mm, Rmr:0-100%(%Rt), Rsk:0-100
Range
± 20 μ m, ± 40 μ m, ± 80 μ M
The maximum display resolution
0.001 μ
Filter
RC, PC-RC, GAUSS, D-P
The sampling length
0.25mm, 0.8mm, 2.5mm, automatic
Evaluation length
1L-5L (optional), L is the sampling length
Measuring the length of stroke
3L-7L (optional)
Maximum drive stroke length
17.5mm/0.71inch
Minimum drive stroke length
1.3mm/0.052inch
Error of indication
≤± 10%
Variation of indication
6%
The tip angle
90 °
Display mode
128 * 64 dot matrix LCD (backlight)
Work environment
Temperature: 0 ° C- and 40 ° C, relative humidity: < 90%
Weight
440G
Appearance size
140 x 52 x 48mm
The basic configuration: host, TS100 sensor, power adapter, reticle templet, sensor sheath, stent
Optional accessories:
TS110 surface sensor, TS120 sensor, TS130 sensor, the trench hole TS131 deep groove sensor, TA610 measurement platform, TA620 measurement platform,TA630 platform, TA631 platform, fine-tuning fine-tuningTA230 micro printer, lateral transfer rod, extension rod, V block, connecting body parts, drive shaft, PC software
