- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
TR200手持式粗糙度儀Roughness tester
該儀器適用于生產現場，可測量多種機加工零件的表面粗糙度，根據選定的測量條件計算機相應的參數，在液晶顯示器上清晰地顯示全部測量結果及圖形,并可在打印機上輸出，亦可與PC機進行通訊。功能特點：
● 高精度電感傳感器
● 可測量顯示13個粗糙度參數
● 采用DSP(數字信號處理器)進行數據處理和控制，速度快，功耗低
● 機電一體化設計，體積小，重量輕，使用方便
● 高品質鋰離子充電電池，容量高，無記憶效應，連續工作時間大于20小時
● 連接時代TA系列打印機，可以打印測量參數及輪廓
● 標準RS232接口，可與PC機通訊
● 可選配曲面傳感器測量曲面，小孔傳感器測量內孔孔壁，溝槽/深槽傳感器測量溝槽底部或臺階的粗糙度
● 菜單操作方式
● 具有圖形顯示功能
● 傳感器觸針位置指示
● 帶存儲功能的自動關機
● 多語言工作方式選擇
技術參數：
|
測量參數 |
Ra、Rz、Ry、Rq、Rt、Rp、Rv、Rmax、R3z、RSk、RS、RSm、Rmr |
|
測量范圍 |
Ra:0.025-12.5μm |
|
顯示范圍 |
Ra、Rq：0.005-16μm，Rz、Ry、Rt、Rp、Rv、Rmax、R3z：0.02-160μm |
|
量程范圍 |
±20μm、±40μm、±80μm |
|
最高顯示分辨率 |
0.001μm |
|
濾波方式 |
RC、PC-RC、GAUSS、D-P |
|
取樣長度 |
0.25mm、0.8mm、2.5mm、自動 |
|
評定長度 |
1L-5L（可選），L為取樣長度 |
|
測量行程長度 |
3L-7L（可選） |
|
最大驅動行程長度 |
17.5mm/0.71inch |
|
最小驅動行程長度 |
1.3mm/0.052inch |
|
示值誤差 |
≤±10％ |
|
示值變動性 |
≤6％ |
|
針尖角度 |
90° |
|
顯示方式 |
128×64點陣液晶（帶背光） |
|
工作環境 |
溫度：0ºC- 40ºC，相對濕度：＜90% |
|
重量 |
440g |
|
外型尺寸 |
140×52×48mm |
基本配置：主機、TS100標準傳感器、電源適配器、多刻線樣板、傳感器護套、支架
可選附件：
TS110曲面傳感器 、TS120小孔傳感器、TS130溝槽傳感器、TS131深槽傳感器、TA610測量平臺、TA620測量平臺、TA630微調平臺、TA631微調平臺、TA230微型打印機、側向轉接桿、接長桿、V型塊、連接體部件、驅動器連接軸、PC軟件
TR200 handheld roughness tester Roughness tester
The instrument is suitable for the production site, canmeasure a variety of machined parts of the surfaceroughness parameters measurement conditions,according to the selected computer corresponding,clearly show that all measurement results and graphics in the liquid crystal display, and print it on a printer, can alsocommunicate with PC.
Function characteristics:
● high precision inductance sensor
● can measure 13 roughness parameter display
● using DSP (digital signal processor) for data processing and control, high speed, low power consumption
The electromechanical integration design, small volume,light weight, easy to use
● high-quality lithium ion rechargeable battery, high capacity, no memory effect, continuous working time more than 20 hours
● connected age TA series printer, you can print the measurement parameters and profile
The standard RS232 interface, can be in communication with the PC machine
● optional sensor surface hole sensor measuring surface,inner hole, trench / deep groove sensor to measure thetrench bottom or step roughness
● menu operation method
● with graphic display function
● sensor needle position indicator
Automatic shutdown, with memory function
Select the language work
Technical parameters:
Measurement parameters
Ra, Rz, Ry, Rq, Rt, Rp, Rv, Rmax, R3z, RSk, RS, RSm,Rmr
Measuring range
Ra:0.025-12.5 μ
Display range
Ra, Rq:0.005-16 μ m, Rz, Ry, Rt, Rp, Rv, Rmax, R3z:0.02-160 μ
RS, RSm:1mm, Rmr:0-100% (%Rt), Rsk:0-100%
Range
± 20 μ m, ± 40 μ m, ± 80 μ M
The maximum display resolution
0.001 μ
Filter
RC, PC-RC, GAUSS, D-P
The sampling length
0.25mm, 0.8mm, 2.5mm, automatic
Evaluation length
1L-5L (optional), L is the sampling length
Measuring the length of stroke
3L-7L (optional)
Maximum drive stroke length
17.5mm/0.71inch
Minimum drive stroke length
1.3mm/0.052inch
Error of indication
≤± 10%
Variation of indication
6%
The tip angle
90 °
Display mode
128 * 64 dot matrix LCD (backlight)
Work environment
Temperature: 0 ° C- and 40 ° C, relative humidity: < 90%
Weight
440G
Appearance size
140 x 52 x 48mm
The basic configuration: host, TS100 sensor, power adapter, reticle templet, sensor sheath, stent
Optional accessories:
TS110 surface sensor, TS120 sensor, TS130 sensor, the trench hole TS131 deep groove sensor, TA610 measurement platform, TA620 measurement platform,TA630 platform, TA631 platform, fine-tuning fine-tuningTA230 micro printer, lateral transfer rod, extension rod, V block, connecting body parts, drive shaft, PC software
