- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
THI100布氏測量系統
將CCD攝像鏡頭對準布氏壓痕，該壓痕圖像被采集傳輸至計算平臺(PC機或工控機)，運用“時代THI100布氏測量軟件”精確定位測量壓痕直徑，并根據測量參數(球頭直徑、載荷等)直接得出對應的布氏值。功能特點：
1、布氏壓痕高精度測量。THI100配備先進CCD，高掃描分辨率，最高可以得到3.5µm精度的壓痕讀數。
2、在測量參數選定后，直接顯示布氏值，無須查表換算，節省查詢對比表的時間。
3、可以顯示X軸、Y軸直徑，可以對非正圓壓痕的進行測量，方便對小口徑軸類工件硬度的測量分析。
4、以圖片格式存儲并顯示壓痕，方便在大量測量時先采樣后算值。
5、符合標準：ISO 6506, ASTM E10， GB/T231
技術參數：
|
測量壓頭直徑 |
2.5mm, 5mm, 10mm |
|
壓痕測量范圍 |
1號鏡頭: 3~6mm |
|
測定硬度范圍 |
8~650HBW |
|
最大測試分辨率 |
0.1HBW |
|
電源 |
單相，220V, 50HZ~60Hz, 2A |
|
重量 |
測頭: 0.5kg, |
|
最大外形尺寸 |
測頭: 150mm×70mm×70mm |
基本配置：
|
測量頭（內置1號、3號鏡頭）
|
1個
|
|
2號鏡頭
|
1個
|
|
標準硬度塊
|
3塊
|
|
1號接口套環
|
1個
|
|
2號接口套環
|
1個
|
|
3號接口套環
|
1個
|
|
加密鎖
|
1個
|
|
軟件光盤
|
1張
|
|
數據線（連接測量頭與計算平臺）
|
1根
|
|
計算平臺（PC機或工控機）
|
1臺
|
THI100 Brinell measurement system
The CCD camera lens alignment Brinell indentation, and the indentation image is collected, transmitted to thecomputing platform (PC or IPC), using the "precisepositioning era THI100 Brinell indentation diametermeasurement software", and according to the measured parameters (ball diameter, load) directly obtain thecorresponding brinell.
Function characteristics:
1, the high precision measurement of Brinell indentation.The THI100 is equipped with advanced CCD, highresolution, the maximum indentation readings can be obtained 3.5 µ m accuracy.
2, in measuring the parameters selected, direct displayBrinell, without checking table conversion, save querytime comparison table.
3, can display the X axis, Y axis diameter, can be measured on the non circle indentation, convenientanalysis of measurement of small caliber shaft workpiece hardness.
4, the picture format to store and display the indentation,convenient in measurement when first sampled value.
5, meet the standards: ISO 6506, ASTM E10, GB/T231
Technical parameters:
Measurement of pressure head diameter
2.5mm, 5mm, 10mm
Indentation measurement range
1 lens: 3~6mm
2 lens: 1.5~3mm
3 lens: 0.7~1.5mm
Determination of hardness range
8~650HBW
The maximum test resolution
0.1HBW
Power Supply
Single phase, 220V, 50HZ~60Hz, 2A
Weight
Probe: 0.5kg,
Portable computer: 10~25kg
The biggest size
Probe: 150mm * 70mm * 70mm
Portable computer: 400mm * 291mm * 213mm
The basic configuration:
The measuring head (built in 1, 3 and 1 lens)
No. 2 lens 1
Standard hardness block 3
No. 1 interface ring 1
No. 2 interface ring 1
No. 3 interface ring 1
Encryption lock 1
Software CD 1
The data line (connecting the measuring head and thecomputing platform) 1
Computing platform (PC or IPC) 1
