- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
BSM—4000熒光磁粉探傷機The testing machin
BSM—4000熒光磁粉探傷機，是適用于鐵磁材料齒輪、棒材、管材、鑄材、軸類等類似形狀的工件多品種、探傷設備，可對工件進行周向、縱向、復合磁化和退磁，周向、縱向、復合均帶斷電相位控制，采用連續法、濕法探傷，一次性磁化全方位顯示磁痕。本機采用 OMRON 工業程序控制器（ PLC 機）控制，全方位退磁，并具有可編程功能，可進行工件夾緊→工件轉動→自動噴液→磁化一次→磁化二次→停止噴液→磁化三次→轉動觀察磁痕（人工觀察）→退磁→松夾→下料等流水線作業，是多品種產品探傷檢測的理想設備。BSM 4000 fluorescent magnetic particle testing machine The testing machin
BSM 4000 fluorescent magnetic flaw detector is suitable for gear, the workpiece, the ferromagnetic material bar,pipe, cast materials, shaft and similar shape variety,testing equipment, the workpiece can be circumferential,longitudinal, composite magnetization and demagnetization, circumferential, longitudinal, combinedwith power-off phase control, continuous method, wettesting, disposable magnetization all-round displaymagnetic mark. The machine adopts OMRON industrial process controller (PLC) control, a full range of demagnetization, and with a programmable function, forclamping of the workpiece, workpiece rotates, automatic spray, magnetization, magnetization time two times, stop the spraying of liquid, three times magnetization,magnetic rotation observation (artificial observation),demagnetization, loose clamp → feeding line operation, is ideal equipment for multiple products of flaw detection.
Main technical parameters:
1, the circumferential current: 0 ~ 4000A (adjustable) with power-off phase control;
2, the longitudinal current: 0 ~ 16000A (adjustable) with power-off phase control
3, the recombination current: week to 0 ~ 4000A(adjustable) with power-off phase control;
Longitudinal 0 ~ 16000AT (adjustable) with power-offphase control
4, demagnetization magnetic potential: 16000A T ~ 0(continuous attenuation);
5, the demagnetizing time: 5 seconds;
6, effect of demagnetization remanence: not more than 3Gs;
7, the clamping distance: 0 ~ 1000mm;
8, inspection cycle: (solidification) 40 sec / piece;
9, the use of power: three phase four wire 380V/210A,50Hz (moment);
10, the use of the environment: temperature: -10 ℃ and40 ℃; humidity: < 80%; non corrosive gas, dust andstrong high-frequency interference;
11, the shape size: length 2420mm, width 810mm, high 1380mm;
12, chamber size: length 2810mm, width 1680mm, high 2200mm;
13, weight: about 750Kg.
