- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
MC-2000C型涂層測厚儀Thickness gauge
一、概述
＂
Type MC-2000C coating thickness tester Thicknessgauge
One, overview
Type MC-2000C coating thickness (coating thickness)measurement range: 0 ~ 5000um, is the result of high and new technology, it uses single chip technology, high precision, digital display, showing the value of stable, low power consumption, simple and convenient operation, a touch button, a single probe full range measurement,small size, light weight; and storage, read, statistics, low voltage indicating, the calibration of the system, its performance to achieve the advanced level of international similar instruments.
The scope of application:
This instrument uses a magnetic thickness method, can be convenient for nondestructive measurement of the thickness of the non magnetic coatings of ferromagneticmaterials, such as iron and steel on the surface of the zinc, copper, chromium coating or paint, enamel, glass,steel, plastics, asphalt coating thickness. The apparatus is widely used in machinery, automobile, shipbuilding,petroleum, chemical, electroplating, spray, enamel, plasticindustry etc..
Working principle.
MC-2000C coating thickness gauge based on electromagnetic induction method for measurement of thickness of coating. Magnetic loop probe on the component surface produces a closed, with the probeand the distance between the ferromagnetic materialchanges, the magnetic circuit will change to a different degree, cause changes in reluctance and probe coil inductance. Using this principle can accurately measure the probe and the distance between the ferromagnetic material, the coating thickness.
Two, product performance
1, range: 0 ~ 5000um
2, the measurement error: <3% ± 1um
3, the minimum value: 1um
4, display mode: 4 LCD digital display
5, the main function:
(1). The measurement: a single probe full range of thickness
(2). Memory, delete: may be deposited in themeasurement data of 600, single suspicious datameasured in the delete, can also delete all data within thestorage area.
(3). Reading: read the measured data has been stored
(4). Statistics: with three statistics, the average value ofthe maximum and minimum value
(5). The calibration: system calibration
(6). N: have undervoltage display function
(7). Print: print measurement, matching the micro printer
(8). Shutdown: with automatic and manual shutdown shutdown two methods
6, power: two 1.5V batteries
7, power: the maximum power dissipation of 100MW
8, the shape size: 50mm*124mm*24mm
9, weight: 150g (including battery)
10, the use of ambient temperature: 0 ℃ ~ +40 ℃:relative humidity of not more than 90%
11, the minimum thickness: 0.5mm matrix
12, the matrix minimum plane diameter: 7mm
13, the minimum radius of curvature of the convexconcave: 6mm:: 1.5mm
14, under voltage indicator: display the upper right corner""
* the critical thickness: iron small workpiece thickness is more than 1mm, the coating (plating) is not affected by the Fe thickness thickness measurement
Three, MC-2000C coating thickness gauge configuration
1, MC-2000C coating thickness gauge a
2, seven, two batteries
3, probe a
4, the standard sample of a box
5, the small aluminum box a
6, specification, certificate of a
Optional accessories:
1, the printer and print 1 sets of communication lines
2, computer communication software 1 set
Corrosion probe in 3
