DJ-6（A）型電火花檢漏儀Electric spark

DJ-6（A）型電火花檢漏儀Electric spark

一、概述

二、產品性能

三、DJ-6（A）型電火花檢漏儀配置單

 

⑴    DJ-6（A）型電火花檢漏儀主機　 　1臺

⑵    高壓探棒　　　　　　　　　　　    1支

⑶    探刷        　　　　　　　　　　    2支

⑷    連接桿                                      1支

⑸    耳機                                         1支

⑹    背帶                                         1條

⑺    保險絲                                      2支

⑻    使用說明書　　　　　　　　　　　1份

⑼    儀器保修卡    合格證　　　　　　 1份

⑽    外包裝箱　　　　　　　　　　　　1個

⑾    接地線　　　　　　　　　　　　　  1根

⑿    充電器　　　　　　　　　　　　　 1個           

注：可選配弧形刷和環形探極（任意長度）

DJ-6 (A) Electric, spark type electric spark detector

One, overview

DJ-6 (A) type electric spark leak detector for detectingthickness: 0.03 ~ 1mm (or customized according to customer requirements), output voltage: 30V ~ 1000V, isa special instrument for detecting metal coating quality,the use of the instrument can be used for differentthickness of glass, glass steel, epoxy coal asphalt and rubber lining and coating, quality testing. When thecoating quality problems, such as pinholes, bubbles,cracks and crack, the instrument will EDM bright, andsound alarm. The battery power supply, and is especially suitable for field operation. The instrument design is advanced, stable and reliable, can be widely used in chemical, petroleum, rubber, enamel industry, is an essential tool used to detect metal anticorrosion coating quality.

Two, product performance

1, suitable for detecting the thickness: 0.03 ~ 1mm (orcustomized according to customer requirements)

2, the output voltage: 30V to 1000V

3, the output voltage direct instructions

4, the DC power supply: 12V

5, power consumption: about 6W

6, the host size: 220 x 130 x 88mm3

7, the light blue background

8, the instantaneous power, automatic power off

9, 3 liquid crystal display output voltage, touch panel

10, alarm, buzzer alarm: headphones double

The testing principle and structure:

Detection principle: electric spark detector is based on the high voltage pulse with a certain amount of various conductive substrate coating surface, as a result ofcoating too thin, leakage of metal or leakage hole, when the high voltage pulse passes, the formation of air gapbreakdown and spark discharge, to the alarm circuit andsend a pulse signal, the alarm sound the alarm, so as to achieve the purpose of anticorrosive layer detection.

Three, DJ-6 (A) type electric spark detector configuration

The DJ-6 (A) type electric spark detector 1 computers

The high voltage probe 1

The exploration of the brush 2

The connecting rod 1

The 1 branch of earphone

The strap 1

The fuse 2

⑻ Manual 1

To make the instrument warranty card certificate in 1 copies

An outer packing box 1

⑾ grounding line 1

1, the charger

Note: optional curved brush and ring probe (of arbitrary length)