- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
FLUKE 416D激光測距儀Range finder
416D 和 411D 激光測距儀提供：
|
此外，421D 和 416D 還具備以下特點：
|
此外，421D 還具備以下特點：
|
| 技術參數 | |||||||||||||
| 距離（對于較長距離，請使用一個靶板） |
|
||||||||||||
| 測量準確度 |
|
||||||||||||
| 激光等級 |
|
||||||||||||
| 激光類型 |
|
||||||||||||
| 自動斷電 |
|
||||||||||||
| 連續測量 |
|
||||||||||||
| 加/減 |
|
||||||||||||
| 電池壽命 |
|
||||||||||||
| LCD 照明 |
|
||||||||||||
| 數據位置 |
|
||||||||||||
| 最小值/最大值 |
|
||||||||||||
| 聲音反饋 |
|
||||||||||||
| 勾股定理功能（間接測量） |
|
||||||||||||
| 防護等級 |
|
||||||||||||
| 尺寸 |
|
||||||||||||
| 重量 |
|
||||||||||||
| 溫度范圍 |
|
||||||||||||
|
使用海拔 (ISO 9022) |
|
||||||||||||
|
貯存濕度 （35 °C 時） |
|
||||||||||||
| 電池 |
|
||||||||||||
* 在有利條件下（最佳目標表面、室溫），最長 10 m (33 ft)。在不利條件下（如強烈日照、反射很弱的目標表面或很大的溫度波動），距離在 10 m (33 ft) 以上時，測量準確度可能會下降到大約 ± 0.25 mm/m (± 0.003 in/ft)。
** 在有利條件下（最佳目標表面、室溫），最長 10 m (33 ft)。在不利條件下（如強烈日照、反射很弱的目標表面或很大的溫度波動），距離超過 10 m (33 ft) 時的偏差可能會增加大約 ±0.15 mm/m (±0.0018 in/ft)。
FLUKE 416D Range finder laser rangefinder
Provide 416D and 411D laser rangefinder:
To reduce the estimation error, save time and cost
Using the most advanced technology of laser distancemeasurement
Measure the distance between two objects by a singlebutton operation instantaneous
Through the laser beam bright easy target
In 3 mm (0.12 in) accuracy measurement up to 30 m (100 ft) distance
Fast calculation of distance formula, such as area(square feet / m2) and volume
Simple distance calculation
By the Pythagorean theorem and two othermeasurements are indirect measurement
Automatic power-off function extends battery life
The displayed value holding function makes the view inhard to reach areas are more easily
Battery: two AAA
Portable bag is fixed on the tool belt
Two years warranty
In addition, 421D and 416D also have the followingcharacteristics:
You can see more data through three line display with backlight illumination
Can be as high as 1.5 mm (0.06 in) accuracy to measurethe length of 60 m (200 ft) distance
The Pythagorean theorem function (by two or three othermeasurement indirect measurement distance)
Electric voice prompts and shutdown alerts
Stores the last ten measurements for quick call distance value
The minimum and maximum value function
With IP54 protection grade (splash, dust), strongenvironmental resistance
In addition, 421D also has the following characteristics:
Measure distances up to 100 meters (330 feet)
Stores the last twenty measurements, in order to quicklycall distance data
Voice enroll, convenient for the corner and incremental measurement
± 45 ° tilt sensor is convenient for indirect measurement in inaccessible places
Three tripod mode allows it to be installed in the threehorse, for long distance measurement
The built-in light sensor, can according to need toactivate the backlight, extended battery life
Angle characteristics, to determine the angle of the corner
Technical parameters
Distance (for long distance, please use a target plate)Fluke 411D 0.1 M to 30 m
(0.33 ft to 100 ft)
Fluke 416D 0.05 M to 60 m
(0.16 ft to 200 ft)
Fluke 421D 0.05 meters to 100 meters
(0.16 to 330 feet)
The measurement accuracy of Fluke 411D* + 3 mm (0.118 in)
Fluke 416D** ± 1.5 mm (0.059 in)
Fluke 421D ± 1.5 mm (0.059 inch)
Laser level Fluke 411D Class II
Fluke 416D Class II
The Fluke 421D class II
Laser type Fluke 411D 635 nm, mW < 1
Fluke 416D 635 nm, mW < 1
Fluke 421D 635 nm, mW < 1
Auto power off Fluke 411D after 180 seconds
Fluke 416D after 180 seconds
Fluke 421D after 180 seconds
Continuous measurement of Fluke 411D
Fluke 416D is
Fluke 421D is
Plus / minus Fluke 411D
Fluke 416D is
Fluke 421D is
Battery life Fluke 411D up to 3000 measurements
Fluke 416D up to 5000 measurements
Fluke 421D up to 5000 measured values
Fluke 411D no LCD lighting
Fluke 416D is
Fluke 421D is
Fluke 411D no data location
Fluke 416D 10
Fluke 421D 20
Minimum / maximum Fluke 411D no
Fluke 416D is
Fluke 421D is
Fluke 411D no sound feedback
Fluke 416D is
Fluke 421D is
The function of the Pythagorean theorem (indirectly)Fluke 411D
Fluke 416D
Fluke 421D complete
Protection grade Fluke 411D IP40
Fluke 416D IP54
Fluke 421D IP54
Size Fluke 411D 123 mm x 50 mm x 26 mm
(4.84 in X 1.97 in X 1.02 in)
Fluke 416D 135 mm x 46 mm x 31 mm
(5.31 in X 1.81 in X 1.22 in)
Fluke 421D 127 mm x 52 mm x 29 mm
(5 inch x 2.06 inch x 1.13 inch)
The weight of Fluke 411D 150 g (5.29 oz)
Fluke 416D 110 g (3.88 oz)
Fluke 421D 125 grams (4.40 ounces)
The temperature range of Fluke 411D storage: -25 ° C to 70 ° C (-13 ° F to 158 ° F)
Work: 0 ° C to 40 ° C (32 ° F to 104 ° F)
Fluke 416D and storage: -25 ° C to 70 ° C (-13 ° F to 158 ° F)
Work: 0 ° C to 40 ° C (32 ° F to 104 ° F)
Fluke 421D
-25 ° C to 70 ° C (-13 ° F to 158 ° F)
0 ° C to 40 ° C (32 ° F to 104 ° F)
The use of altitude
(ISO 9022) Fluke 411D up to 3500 m
Fluke 416D up to 3500 m
Fluke 421D up to 3500 meters
Storage humidity
(35 ° C) Fluke 411D 85% is the highest (24 hours)
Fluke 416D 85% is the highest (24 hours)
Fluke 421D Max 85%, lasts 24 hours
Battery Fluke 411D AAA (2)
Fluke 416D AAA (2)
Fluke 421D AAA (2)
* under favorable conditions (the best target surface, Shi Wen), the length of 10 m (33 ft). Under adverse conditions (such as the strong sunshine, reflecting weaktarget surface or large temperature fluctuations), at a distance of 10 m (33 ft) above, the measurement accuracy is likely to drop to about 0.25 mm/m (0.003 in/ft).
* * under favorable conditions (the best target surface,Shi Wen), the length of 10 m (33 ft). Under adverse conditions (such as the strong sunshine, reflecting weaktarget surface or large temperature fluctuations), a distance of more than 10 m (33 ft) when the deviation may increase of about ± 0.15 mm/m (0.0018 in/ft).
