- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
DAKOTA超聲波測厚儀35-DL
35DL美國達高特DAKOTA超聲波測厚儀
DAKOTA ultrasonic thickness gauge 35-DL
35DL American Dagaote DAKOTA ultrasonic thickness gauge
Mode 1: the use of direct contact probe measurementsbetween the excitation pulse and the first backwall echointerval.
Mode 2: delay between the type or water immersionprobe was used to measure the excitation pulse after the first interface echo and the first backwall echo interval.
Mode 3: delayed or water immersion probe was used to measure the excitation pulse tight with the two firstinterface echo continuous bottom echo interval.
Measurement type: thickness, velocity or transit time
Thickness measurement range of 0.003-25 inch (0.008-635mm)
Thickness range depends on the instrument type,material, probe, surface condition and the choice of parameter settings.
Material velocity range:
0.02000-0.7362inch/us
(0.5080-18.699mm/us)
Resolution (keyboard optional)
Low: 0.01 "(0.1mm)
Standard: 0.001 "(0.01mm)
High: 0.0001 "(0.001mm)
Transit time measurement range: 0.0-109.5us transit timeresolution: fixed at 000.01us
The measurement update rate:
4, 8, 16 or 16-20HZ (depending on the application andmeasurement mode)
The probe frequency range:
2.25-30MHZ
Minimum / maximum mode: press set to display the current thickness, minimum or maximum thickness value
Display hold / blank: display a blank or keep reading indisplay the previous readings
Alarm mode: with audible and visual indicatorprogrammable high and one low alarm set point
The difference mode: show the actual measured values and the reference values of the thickness differencebetween
The thinning rate mode: show the actual measured values and the reference values of the thickness difference between and percent difference
Application of automatic calling function: the different default and automatically adjust the internal parameter setting custom probe
Other standard features: calibration lock mode, the internal diagnostic test mode, metric / imperial units,airborne statistics
35DL USA Dagaote ultrasonic thickness tester DAKOTA35DL power supply
Battery: 3AA alkaline batteries or NIMH batteries
Operating time: 150 hour calibration time; with the background lamp continuous operating time of 30 hours
Low battery indicator: indicates the battery state of continuous
Battery protection device: automatic closing / continuousopen AC AC power supply: Options
35DL USA Dagaote DAKOTA ultrasonic thickness gauge35DL general performance
Environmental adaptability
Splash proof, shock resistant shell. Sealing, touch the color coding keyboard and voice feedback
Operating temperature range:
-10 ℃ ~+50 ℃ (14 ℉ ~122 ℉)
Size: 3.31 "wide x 6" long x 1.5 "(84 x 152 x 37.5mm)
Weight: 8.5oz (0.24kg)
Language functions: allows user-defined translation display content in multiple languages in Guangxi
35DL America Dagaote DAKOTA ultrasonic thickness gauge 35DL standard configuration:
Anyway, 3AA cell, block, probe cable, coupling agent,transport box, operation manual, two-year limitedwarranty.
35DL USA Dagaote DAKOTA ultrasonic thickness gauge35DL optional accessories
35/WF real time waveform
Gageview interface program
35DL/RS232 RS232 output
35PCScope PCScope program
USB/ADP-115 AC-115 power supply
USB/ADP-230 AC-230 power supply
MG2/RPC protective rubber sleeve
35/DLRETRO 35 upgrade to 35DL
