- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
|
Product name |
Active discharge printing paste (white discharge) |
|
State |
Paste 咨詢熱線：13798943124謝燕紅 QQ：1013292912 |
|
Packing |
20KG/drum |
|
Storage |
6 months in cool place |
|
Application |
Suitable for knitting which dyed with active pigment |
|
Features |
1. High fastness 2. Extra white for white discharge, better effect than Italian products. 3. High softness 4. SGS detecting passed, no PVC, no heavy metal, no NPEOs. |
|
Mix proportion |
Discharge printing paste 85-95% + discharge powder 5-10% |
|
Printing process |
1.Mixing discharge powder, discharge printing paste, pigment and stirring them evenly. 2.Printing for 1 time (3-4 scrapes per time). 3.Baking for 1-3 minutes or hot pressing for 10 seconds under 160-180℃(within 5-30 minutes after printing). 4.Finish. |
|
Attentions |
1. The pigment is max 12%. 2. Please use up the discharge printing pastes which already mixed with discharge powder, otherwise it'll be not stable for the effect. 3. Don't put the knit discharge powder together with the jean discharge powder, otherwise it'll be on fire. |
|
品名 |
活性拔印漿(拔白） 咨詢熱線：13798943124謝燕紅 QQ：1013292912 |
|
外觀 |
乳白色糊狀 |
|
包裝 |
20KG/桶 |
|
貯存期 |
常溫下6個月 |
|
應用 |
使用活性染料染色的綿布 |
|
賣點 |
1. 拔白度比意大利拔印漿效果好0.4-1倍以上 2. 手感柔軟 3. 符合美國ASTM對鄰苯二甲酸脂和歐盟EN71 Part 3對重金屬含量的要求 |
|
調配比例 |
拔白：拔印漿85-95% +拔印粉5-10% |
|
工藝流程 |
1. 絲網選用80-100目，用絲印硬方刀75度刮印1次（3刀左右），以印透纖維為佳。 2. 印完后等5分鐘左右（不超30分鐘）待拔印漿滲透布料 3. 160-180度烘烤1-3分鐘或壓燙10-25秒 |
|
注意事項 |
1. 對色牢度要求高的產品，加1-2%固化劑可提高牢度 2. 調入牛仔拔印粉的漿料請在8小時內用完 3. 針織拔印粉和牛仔拔印漿不能放在一起，否則有著火的危險！ 咨詢熱線：13798943124謝燕紅 QQ：1013292912 |
