美國vanguard IRM-5000P絕緣電阻測試儀

Vanguard Instrument Company’s Model IRM-5000P Megohmmeter is a micro-processor based, high-voltage, insulation-test meter. The Model IRM-5000P is rugged and portable, making it ideal for use in electric-utility substations and for industrial application.

This sophisticated insulation tester uses a dual-microprocessor design. One microprocessor is dedicated to the control of the power supply and measuring circuitry. The second microprocessor is dedicated to the display, printer control, and user interfaces.

• Dual-processor design
• Perform PI, SV & DD tests automatically
• Test duration from 1 to 90 minutes
• Automatically discharge test voltage
• Measures capacitance of DUT
• Store up to 100 test reports
• IR temperature probe, provide equivalent resistance reading at 40°C/10°C
• Built-in 2.5" thermal printer
• Computer Interface

IRM-5000P	Cables
Cable Part Number [8000-0006] RS-232C Cable [ 6' (1.83m) ] 8000-0006 [8000-0091] Temp Sensor 8000-0091 [8000-0094] IRM 15' Cable Set (2 cables) 8000-0094 [8000-0112] Power Cable 8000-0112 [8000-0145] IRM 6' Cable Set (3 cables) 8000-0145

IRM-5000P	Technical Specifications
TYPE Insulation resistance meter PHYSICAL SPECIFICATIONS 19”W x 7”H x 15”D, (48 cm x 17 cm x 38 cm); Weight: 24lbs (10.9 kg) INPUT POWER 110 – 120 Vac or 220 – 240 Vac (selectable), 50/60Hz RESISTANCE READING RANGE (0°C to +30°C) 100 K-ohms – 1 M-ohm ±20%, 1 M-ohm – 1 T-ohm ±5%, 1 T-ohm – 5 T-ohm ±20% , 5kV 100 K-ohms – 1 M-ohm ±20%, 1 M-ohm – 100 G-ohms ±5%, 100 G-ohms – 500 G-ohms ±5%, 500 V 1 M-ohm – 10 G-ohms ±5%, 50 V TEST VOLTAGE Selectable from 50Vdc – 5 KVdc, in 2 Vdc steps OUTPUT VOLTAGE ACCURACY (0°C to +30°C) ±2%, ±1v of selected voltage with load resistance greater than 100 MΩ SHORT CIRCUIT CURRENT 2 mA max CURRENT READING RANGE (0°C to +30°C) 0.03 nA – 2 mA; Accuracy: ±5% ±0.2 nA CAPACITANCE READING RANGE (0°C to +30°C) 0.01 μF – 10.0 μF (Test voltage greater than 100V); Accuracy: ±5% ±0.03 μF VOLTAGE READING RANGE (0°C to +30°C) 50 – 1250 Vac (rms) or dc; Accuracy: ±5%, ±1V CAPACITOR DISCHARGE Less than 2 Sec/μF, automatic at the end of test HUM REJECTION 1mA per 1kv of test voltage, 2mA rms maximum BATTERIES Two 12V, 2.0 Ah sealed lead acid batteries. Battery life: typical 6 hrs, continuous testing. The IRM-5000P can be used while charging. PRINTER Built-in 2.5-inch wide thermal printer can print test results in both tabulated and graphic formats COMPUTER INTERFACE One RS-232C port SAFETY UL Certified (UL 61010A-1), CAN/CSA Certified (C22.2 No. 1010.1-92) ENVIRONMENT Operating: -10? to 50? C (15? to +122? F); Storage: -30? C to 70? C (-22? to +158? F) CABLES One 6-foot cable set, one 15-foot cable set, ground cable, power cord, cable bag OPTIONS Transportation Case WARRANTY One year on parts and labor Specifications are valid at nominal voltage and ambient temperature of +25?C (+77?F).