美國vanguard SGT-200安全接地測試儀

產品價格：	/人民幣
最后更新：	2018-01-02 13:17:07
產品產地：	美國
發貨地：	上海 (發貨期：當天內發貨)
供應數量：	不限
有效期：	長期有效
最少起訂：	1
瀏覽次數：	117

公司基本資料信息

上海山合海融商貿有限公司
孫寶金先生經理
會員[試用會員產品]
郵件sh@51082245.com
手機13818244503
電話
傳真
地址上海市寶山區陸翔路678弄60號

產品詳細說明

The Vanguard SGT-200 Safety Ground Tester is a 200A DC micro-ohmmeter designed specifically to measure the resistance of protective in-service grounding and jumper cable assemblies. The SGT-200 can measure the resistance of the grounding cables, clamps and ferrules. The measured resistance values can be compared against the calculated values (using the ASTM 2249-03 standard) and a Pass/Fail result can be printed along with the measured resistance values. Since the SGT-200 uses a DC current, there is no need to uncoil the cable under test. It can be conveniently tested in its coiled state in a much smaller testing enviornment.

The SGT-200 can measure resistance value from 1 micro-ohm to 1000 milliohms. A typical test requires the two ends of the safety ground cable to be connected to the terminals of the SGT-200. The resistance of the cable and ferrules can then be measured. If the cable size, cable length and temperature are provided, the SGT-200 will determine if the cables passes or fails the test and a pass/fail indicator will be printed on the test report.

Test results are printed on the unit's built-in 2.5” thermal printer. A 44-key QWERTY-style rugged membrane keypad is used to input information and control the SGT-200. A back-lit graphic LCD screen (128 x 64 pixels) is used to display menus and test results.

The SGT-200 can store up to 100 test records in its internal memory. It also features a USB Flash drive interface port that can be used to store test data in a USB flash drive (not included). The SGT-200 also features an RS-232C port that is used for factory diagnostics and calibration. Test records can be reviewed and printed on a PC using the provided Vanguard VUS software.

SGT-200

Technical Specifications

*TYPE*	Safety Ground Tester
*PHYSICAL SPECIFICATIONS*	Dimensions: 21”W x 8”H x 14” D (53.3 cm x 20.3 cm x 35.6 cm) Weight: 31 lbs. (14.1 Kg)
*INPUT POWER*	100 – 240 Vac, 50/60 Hz
*RESISTANCE READING RANGE*	1 micro-ohm to 1000 milliohms (max 1.5 milliohms @ 200A, 450 milliohms @ 10A, 1000 milliohms @ 1A)
*TEST CURRENT RANGE*	10A – 200A (selectable in 1A steps); thermally protected DC power supply
ACCURACY	10A – 49.9A: 1% ±2 micro-ohms 50A – 200A: 1% ±1 micro-ohm
TEST VOLTAGE	5 Vdc
DISPLAY	Back-lit LCD screen (128 x 64 pixels); viewable in bright sunlight and low-light levels
KEYPAD	Rugged, 44-key "QWERTY" membrane keypad
INTERNAL TEST RECORD STORAGE	100 test records
EXTERNAL TEST RECORD STORAGE	Up to 999 test records on external USB flash drive
PC SOFTWARE	Windows?-based analysis software is included with purchase price
COMPUTER INTERFACES	One RS-232C PC interface, one USB flash drive interface
PRINTER	Built-in 2-1/2” wide thermal printer
SAFETY	Designed to meet IEC 61010 (1995), UL 61010-a, and CAS-C22.2 standards
TEMPERATURE	Operating: -10°C to +50°C (+15°F to +122°F) Storage: -30°C to +70°C (-22°F to +158°F)
HUMIDITY	90% RH @ 40°C (104°F) non-condensing
CABLES AND ACCESSORIES	power cord, ground cable, standard cable stud (1" dia, 2 pcs), elbow adapter (female, 1/2" dia, 1 pc), bushing adapter (male, 1/2" dia, 1 pc)
ALTITUDE	2,000 m (6,562 ft) to full safety specifications
OPTIONS	Shipping case
WARRANTY	One year on parts and labor
Specifications are valid at nominal voltage and ambient temperature of +25?C (+77?F).

在線詢盤/留言 請仔細填寫準確及時的聯系到你!

您的姓名：	您的姓名沒有寫*	預計需求數量：	* 請輸入整數 請?zhí)顚憯?shù)量
聯系手機：	*	移動電話或傳真：
電子郵件：	*郵箱格式不正確請?zhí)顚懩愕碾娮余]件	所在單位：
咨詢內容：	我想了解：《美國vanguard SGT-200安全接地測試儀》的詳細信息.請商家盡快與我聯系。 *