NI-ROD? FC55 藥芯焊絲AWS A5.15 ENiFeT3-CI

NI-ROD^? FC55 藥芯焊絲

NI-ROD FC55藥芯焊絲主要應用于藥芯焊絲電弧焊和埋弧焊焊接灰口鑄鐵、可鍛鑄鐵和球墨鑄鐵，還可應用于鑄鐵的表面堆焊以及鑄鐵和碳鋼、低合金鋼的焊接。這種焊絲和NI-ROD 55焊條一樣適于高速自動或半自動焊接并有較高的經濟性。

用NI-ROD FC55藥芯焊絲進行埋弧焊時應使用INCOFLUX 5焊劑。

 焊絲有線卷或直線狀兩種供貨形態，并有幾種不同直徑可供選擇，如下表所示

產品    

供貨

狀態

直線長度--915 mm(36”)或1000 mm(39”)

NI - ROD FC55 flux-cored wire is mainly used in flux-cored wire arc welding and submerged arc welding welding of grey cast iron, malleable cast iron and nodular cast iron, can also be applied to the surface of cast iron welding and carbon steel, low alloy steel and cast iron welding. This wire is just as suitable for high speed automatic or semi-automatic welding as the ni-rod 55 electrode.

INCOFLUX 5 flux should be used in the submerged arc welding with NI-ROD FC55.

Specification AWS A5.15 enifet3-ci ISO T C NiFe-1

UNS N82032 Europe T C NiFe-1

ASME Ⅱ, SFA 5.15, ENiFeT3 - CI

Typical Nib -- -- -- -- -- -- -- -- -- -- -- -- 50.0 Mn -- -- -- -- -- -- -- -- -- -- -- -- -- 4.2

Chemical C -- -- -- -- -- -- -- -- -- -- -- -- 1.0 Fe -- -- -- -- -- -- -- -- -- -- -- -- 44.0

-------- -0.6

A is not affected by the cladding rate

B. add Co

Typical tensile strength, psi 69,000

Mechanical 476 MPa

Performance extension rate (4d) % 15.5

There are two kinds of supply configuration of wire or straight line, and several different diameters are available, as shown in the following table

products

Mm 0.8 0.9 1.0 1.14 1.2 2.4 3.2

In 0.030 0.035 0.040 0.045 0.035 0.062 0.093 0.125

supply

state

Linear length -915 mm(36 ") or 1000 mm (39)