- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
Items Speci?cations
Model AAT145 AAR145
Number of input channels 16, isolated channels 16, isolated channels
TC: JIS C1602:1995 (*1), IEC584:1995 Type J, RTD: JIS C1604:1997 (*3), IEC751:1995 Pt100
Input signal K, E, B (*2), R, S, T, N (3-wire type)
mV: -100 to 150 mV, -20 to 80 mV POT: Total resistance 100 ? to 10 k? Span
resistance: 50 % or more of total resistance
Switching input signals TC/mV can be set individually for CH1 to CH16. RTD/POT can be selected individually for CH1 to
CH16.
Allowable input voltage _5 V _5 V
Withstanding voltage Between input and system: 500 V AC (for single card: 1500 V AC), For 1 minute
Between input channels: 200 V AC, For 1 minute
Input resistance Power ON 1 M? or more
Power OFF 1 M? or more
Accuracy _40 _V RTD: _150 m?
POT: _0.2 %/FS
Allowable total resistance of 1000 ? or less 150 ? or less (wiring resistance per wire)(*4)
signal source plus wiring
Effect of allowable signal _20 _V —
source resistance (1000 ?)
Reference junction _1 _C (*5) (6) —
compensation accuracy
Measurement current — RTD: 1 mA
Data update period 1 s
All channels can be set together.
Burn-out Setting: not available/available (UP/DOWN)
detection time: 60 s
Temperature drift _80 _V/10 _C RTD: _0.3 ?/10 _C
POT: _0.4 %/10 _C
Maximum current 350 mA (5 V DC) 350 mA (5 V DC)
consumption
Weight 0.3 kg
External connection Dedicated cable (KS1) Dedicated cable (KS8/AKB335)
*1: Model AAT145 is also in compliance with JIS C1602:1981.
*2: Type B dose not carry out temperature compensation and can not measure under 44 _C.
*3: Model AAR145 is also in compliance with JIS C1604:1989 (Pt100, JPt100).
*4: Each wiring resistance should be equal.
*5: This accuracy changes due to the installation condition.
If measured temperature is lower than 0 _C, multiply the above value by the following coef?cient (K):
= Thermoelectromotive force per degree at 0 _C
Thermoelectromotive force per degree at measured temperature
F05E.ai
*6: Reference junction compensation accuracy varies depending on the temperature environment of terminal board (AET4D).
Speci?cations for Terminal board only
Temperature Environment Reference Junction Compensation accuracy
-20 to 0 ?C _1.5 ?C
0 to 30 ?C _1.0 ?C
30 to 70 ?C _1.5 ?C
Speci?cations for installing in a standard cabinet
Temperature Environment Reference Junction Compensation accuracy
0 to 30 ?C _1.0 ?C
30 to 50 ?C _1.5 ?C
