EP背貼橡膠止水帶350*6mm

EP背貼橡膠止水帶350*6mm

背貼式橡膠止水帶是指外貼式中間有孔的橡膠止水帶產品，又稱外貼式止水帶或背貼式止水帶，主要有EB型橡膠止水帶和EB型塑料止水帶兩種。EB型止水帶主要適用于混凝土構筑物底板或壁板外側（構筑物迎水面），實際應用時主要使用在水壓及變形量較小的變形縫、伸縮縫、沉降縫等，具有與混凝土錨固緊密、止水密封及適應伸縮縫拉伸變形等特點，是我公司根據多年橡膠止水帶生產經驗，并結合《給水排水工程混凝土構筑物變形縫設計規程》CECS117：2000開發生產的一種新型外貼式止水帶。示例：
The back attached rubber water stop is a rubber sealing belt with a hole in the middle. It is also called the external type water stop or the back type water stop. There are two kinds of EB rubber water stop and EB type plastic water stop belt. Type EB sealing strip is mainly applicable to concrete structures (lateral bottom or wall structures upstream), the actual application is mainly used in deformation pressure and smaller deformation joints, expansion joints and settlement joints, with close, anchorage and concrete seal and adapt to the characteristics of expansion joints tensile deformation, is my company according to many years of production experience and the rubber sealing belt, combined with the "water supply and drainage engineering concrete structures deformation joint of a new design specification" CECS117:2000 development and production of stick type waterstop. Examples:

EP背貼橡膠止水帶350*6mm
EP300×6-30(CR)表示由生產的外貼式中間有孔的埋入式氯丁橡膠止水帶，寬度為300mm,厚度為6mm，變形縫寬30mm。
EP300 * 6-30 (CR) is an embedded chloroprene rubber belt with a width of 300mm, a thickness of 6mm, and a 30mm width of the deformation seam.
EB型止水帶是指外貼式中間有孔的止水帶，又稱外貼式止水帶或背貼式止水帶，主要有EB型橡膠止水帶和EB型塑料止水帶兩種。EB型止水帶主要適用于混凝土構筑物底板或壁板外側（構筑物迎水面），實際應用時主要使用在水壓及變形量較小的變形縫、伸縮縫、沉降縫等，具有與混凝土錨固緊密、止水密封及適應伸縮縫拉伸變形等特點，是我公司根據多年生產經驗，并結合《給水排水工程混凝土構筑物變形縫設計規程》CECS117：2000開發生產的一種新型外貼式止水帶。
The EB type water stop is a water stop belt with a hole in the middle. It is also called the external type water stop or the back type water stop. There are mainly two kinds of EB type rubber water stop and EB plastic water stop. Type EB sealing strip is mainly applicable to concrete structures (lateral bottom or wall structures upstream), the actual application is mainly used in deformation pressure and smaller deformation joints, expansion joints and settlement joints, with close, anchorage and concrete seal and adapt to the characteristics of expansion joints tensile deformation, is my company according to many years of production experience, combined with the "water supply and drainage engineering concrete structures deformation joint of a new design specification" CECS117:2000 development and production of stick type waterstop.

EP背貼橡膠止水帶350*6mm
示例：EP300×6-30(CR)表示由衡水中意工程橡膠生產的外貼式中間有孔的埋入式氯丁橡膠止水帶，寬度為300mm,厚度為6mm，變形縫寬30mm。
Example: EP300 * 6-30 (CR) represents the embedded type neoprene sealing belt with external perforated middle holes produced by Hengshui Zhongyi engineering rubber, the width is 300mm, the thickness is 6mm, the deformation joint width is 30mm.
背貼式橡膠止水帶作用與原理背貼式橡膠止水帶是利用橡膠的高彈性，在各種荷載下產生彈性變形，從而起到堅固密封，有效地防止建筑構造的漏水，滲水并起到減震緩沖作用。在許多工程建筑設計中，土建、水土結構之間都有一定的伸縮要求，并存在防水防震等問題，因此采用和安裝橡膠止水帶是有效地解決以上種種問題的手段。本產品主要用于混凝土現澆時設在施工縫及變形縫內，與混凝土結構成為一體的基礎工程、地下設施、隧道涵洞、輸水渡槽、擋水壩等，確保工程建設的使用壽命。
河北瑞博橡塑制品有限公司是一家集橡膠支座，橡膠止水帶，伸縮縫等工程橡膠制品為主的專業生產企業。歡迎各界朋友蒞臨參觀指導，業務洽談。歡迎致電：13166570832