- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
 |
     |
||
   |
|||
| AGP3200-T1-D24 |
|
||
| Class | S Class | |
|---|---|---|
| International Safety Standards |  |
|
| Display Type | TFT Color LCD | |
| Display Colors | 256 Colors (no blink) / 64 Colors (3-speed blink) *1 | |
| Backlight | LED (Not user replaceable. When replacement is required, contact your local GP distributor.) |
|
| Display Resolution | 320 x 240 pixels | |
| Effective Display Area | 78.8mm x 59.6mm | |
| Brightness Control | 16 levels of adjustment available via touch panel | |
| Contrast Adjustment | - | |
| Language Fonts | Japanese: 6962 (JIS Standards 1&2) (including 607 non-kanji characters), ANK: 158 (Korean fonts, Simplified and traditional Chinese fonts are downloadable.) |
|
| Text Composition | Character Sizes | Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 dot fonts, Stroke font: 6 to 127 dot fonts (Full-size character: 12 to 254 dot fonts) |
| Font Sizes | Standard font: Width can be expanded up to 8 times. Height can be expanded up to 8 times *2 |
|
| Text | 8 x 8 dots | 40 Char. x 30 rows |
| 8 x 16 dots | 40 Char. x 15 rows | |
| 16 x 16 dots | 20 Char. x 15 rows | |
| 32 x 32 dots | 10 Char. x 7 rows | |
| Memory | Application | 6MB FLASH EPROM *3 |
| Data Backup | 320KB SRAM *4 | |
| Touch Panel |
Type | Resitive Film (analog) |
| Resolution | 1024 x 1024 | |
| Control Memory |
Variable Area | 64 KB SRAM (uses lithium battery) *4 |
| Program Area | - | |
| Interface | Serial Interface (COM1) |
Asynchronous Transmission: RS-232C/422/485 *5, Data Length: 7 or 8 bits, Stop Bit: 1 or 2 bits, Parity: none, Odd or Even, Data transmission speed: 2400bps to 115.2kbps (MPI: 187.5kbps *6), Connector: D-Sub 9pin male |
| Ethernet Interface | IEEE802.3u, 10BASE-T/100BASE-TX, modular jack connector (RJ-45) | |
| USB Interface | USB1.1 Host I/F, USB TYPE-A connector x 1 | |
| Ship Standard Acquisition | - |
|---|---|
| Rated Voltage | DC24V |
| Rated Voltage Range | DC19.2V to 28.8V |
| Allowable Voltage Drop | 2ms or less |
| Power Consumption | 13W or less |
| Voltage Endurance | AC1000V 20mA for 1 minute (between charging and FG terminals) |
| Insulation Resistance | 10MΩ or higher at DC500V (between charging and FG terminals) |
| Operating Temperature | 0oC to +50oC *7 |
| Storage Temperature | -20oC to +60oC |
| Humidity | 10%RH to 90%RH (Non-condensing, wet bulb temperature: 39oC or less) |
| Storage Humidity | 10%RH to 90%RH (Non-condensing, wet bulb temperature: 39oC or less) |
| Pollution Degree | Pollution Degree 2 |
| Corrosive Gasses | Free of corrosive gasses |
| Atmospheric Endurance (GP Operation Altitude) |
800hPa to 1114hPa (2000 meters or lower) |
| Vibration Resistance | IEC61131-2 (JIS B 3502) compliant 5Hz to 9Hz Single amplitude 3.5mm 9Hz to 150Hz Fixed acceleration 9.8m/s2 X,Y,Z directions for 10 times (100min.) |
| Noise Immunity (via noise simulator) |
Noise Voltage: 1000Vp-p Pulse Duration: 1μs Arise Time: 1ns |
| Electrostatic Discharge Immunity | 6kV(complies with EN 61000-4-2 Level 3) |
| Grounding | 100Ω or less, or your country's applicable standard *8 |
| Ratings (For front panel of installed unit) |
Equivalent to IP65f NEMA #250 TYPE 4X/13 *9 |
| External Dimensions | W130mm x H104mm x D40.0mm |
| Weight | 0.4kg or less |
| Cooling Method | Natural air circulation |
| *1 | Changing the Colors setting to "256 colors" will disable the blinking feature on all screens in your project. If you wish to use the blinking feature, select "64 colors". |
|---|---|
| *2 | Font Sizes can be set up by software. |
| *3 | User area. |
| *4 | A Lithium battery's lifetime is: 10 years when the battery's ambient temperature is 40oC or less. 4.1 years when the battery's ambient temperature is 50oC or less. 1.5 years when the battery's ambient temperature is 60oC or less. When used for back up: Approximately 60 days, with a fully charged battery. Approximately 6 days, with a half-charged battery. |
| *5 | RS-232C and RS-422/485 are software switchable. |
| *6 | SIEMENS SIMATIC S7-200/300/400 series (MPI port only). Please contact your Pro-face sales representative for supported models and other details. |
| *7 | Operating temperature refers to temperature inside mounting enclosure. |
| *8 | Grounding requirements differ from country to country. Be sure to confirm your work environment requirements prior to installation. For more information, please contact your local Pro-face office. |
| *9 | The degree of protection provided by these products is equivalent to IP65f, however their performance cannot be guaranteed for every environment. Be sure to confirm your work environment requirements prior to installation. |
