SNH660R54U8W2三螺桿泵,供應山西煤焦化

SNH660R54U8W2三螺桿泵,供應山西煤焦化

一、  SNH三螺桿泵產品簡介結構特點優勢說明

南京科友工業設備有限公司

180.180.72397 李常志

1、   SNH三螺桿泵產品概述簡介：

SNH三螺桿泵是無脈動軸向輸送具有一定潤滑性介質的定量容積式低壓轉子泵，適于輸送燃料油、潤滑油、液壓油、礦物油等油類和具有潤滑性的流動性液體。所輸送的介質中不得含有任何磨料顆粒和對泵材料有腐蝕的物質。SNH系列三螺桿泵由特殊型線（擺線）構成的螺旋型面，當電機或馬達驅動主動螺桿轉動時，其不斷運動的各個密封腔室逐漸形成真空，液體在大氣壓的作用下由吸入口吸入并沿軸向連續、無脈動的輸送到排出口，無攪拌、乳化現象。形成排出壓力的能力取決于系統負載和螺桿密封腔的數量，同時也與輸送介質的粘度以及驅動轉速也有一定的關系。

SNH三螺桿泵的主動螺桿和從動螺桿采用液壓平衡裝置，被輸送的液體在泵腔內做連續、勻速的軸向直線運動，無脈動，噪音低，運轉平穩，流量壓力穩定，工作平穩，振動小。

SNH三螺桿泵的零部件通用互換性好，可以任意拆解，更換相應的零部件。泵零件少，結構簡單，重量輕，安裝、使用、維修方便，效率高，壽命長。

三螺桿泵的從動螺桿的軸向力支撐在后蓋或主動螺桿上，并由液壓力驅動旋轉，從動螺桿由液壓力驅動，，主動螺桿和從動螺桿之間沒有機械接觸，螺桿之間，螺桿和泵套之間皆有油膜保護，因而螺桿型面僅傳遞液壓扭矩，并不受力，也無磨損和機械摩擦，對全部傳動零件而言，均由被輸送介質形成的油膜保護和潤滑。

三螺桿泵的主桿的徑向旋轉跳動由平衡活塞套也可以叫滑動軸承定位，且借助于平衡活塞和軸套的間隙使高壓腔和密封腔分開，在密封腔內裝有機械密封，無泄漏，腔內的油液回油孔與泵的吸入腔相通，因而不受排出壓力的影響。

具有很強的自吸能力，節能低耗，不需要底閥及每次開機前灌油。

組合系列化有多種結構，可用于臥式（H），法蘭式（F）和立式（S）浸油式（J）以及懸掛式(K)安裝。

根據所輸送介質需要還可提供加熱或冷卻結構。

對于潤滑性相對較差的介質，可以采用軸承外置結構（W1）以及金屬波紋管密封。保證三螺桿泵優良的使用壽命。

為了保護泵、電機和管路系統，泵必須帶有外置或內置安全閥裝置。
可輸送介質種類：

A  潤滑性液體：液壓油，礦物油，機械油，潤滑油，淬火油，齒輪油，變壓器油，汽輪機油，水乙二醇，原油，動植物油等

B  低潤滑性液體：輕柴油，重柴油，燃油，燃料油，重油，渣油，含臘稀油，冷卻液，皂化液等

C  粘性液體：各種合成橡膠液，人造膠液，乳化液等

SNH initiative three screw screw screw and driven by hydraulic balancing device, the liquid in the pump chamber is fed continuously to do, uniform axial linear motion, no pulse, low noise, smooth operation, flow pressure stable, smooth, vibration.

SNH three screw generic interchangeability of parts, which could be disassembled, replace the corresponding parts. Pump parts, simple structure, light weight, easy to install, use, maintenance, high efficiency, long life.

Axial force supporting three screw driven screw on the back cover or active screw driven by a hydraulic pressure rotating, driven screw driven by fluid pressure, there is no mechanical contact between the screw and the initiative driven screw, screw the Individually film protection, which passed between the surface between screw type, screw and hydraulic torque pump sets only, not by force, and no mechanical wear and friction, for all transmission parts, the film is transported by the formation of protective medium and lubrication.

Three main radial screw rod rotation beating balanced by the piston sleeve can also be called sliding bearing positioning and balance clearance between the piston and sleeve by means of high-pressure chamber and sealing chamber separately in a sealed chamber equipped with a mechanical seal, no leakage , the oil return hole cavity pump suction chamber communicating with, and therefore not affected by the pressure of the discharge.

Has a strong self-absorption capacity, low energy, no bottom valve and filling the oil before each start.

The series combination of a variety of structures can be used in horizontal (H), flange (F) and vertical (S) oil immersion formula (J) and suspended (K) installed.

May need to provide heating or cooling structure according to the transmission medium.

For the relatively poor lubrication media, you can use an external bearing structure (W1) and metal bellows seal. Three screw ensure good life.

To protect pumps, motors and piping systems, pumps must have external or internal valve devices.
Can transport media types:

A lubricating fluid: hydraulic oil, mineral oil, mechanical oil, lubricating oil, quenching oil, gear oil, transformer oil, turbine oil, water glycol, oil, animal and vegetable oil

B low lubricity liquids: light diesel oil, heavy diesel oil, fuel oil, fuel oil, heavy oil, residual oil, wax-containing light oil, coolant, and other fluid saponification

C viscous liquid: liquid synthetic rubber, synthetic glue, emulsion, etc.

SNH660軸承內置系列規格三螺桿泵
SNH660R40U8W2  SNH660R44U8W2  SNH660R46U8W2  SNH660R51U8W2 SNH660R54U8W2
SNH660R40U8W30  SNH660R44U8W30  SNH660R46U8W30  SNH660R51U8W30 SNH660R54U8W30
SNH660R40U8W21 SNH660R44U8W21 SNH660R46U8W21 SNH660R51U8W21 SNH660R54U8W21
SNH660R40U8W23 SNH660R44U8W23 SNH660R46U8W23 SNH660R51U8W23 SNH660R54U8W23
SNF660軸承內置系列規格三螺桿泵
SNF660R40U8W2  SNF660R44U8W2  SNF660R46U8W2  SNF660R51U8W2 SNF660R54U8W2
SNF660R40U8W30  SNF660R44U8W30  SNF660R46U8W30  SNF660R51U8W30 SNF660R54U8W30
SNF660R40U8W21 SNF660R44U8W21 SNF660R46U8W21 SNF660R51U8W21 SNF660R54U8W21
SNF660R40U8W23 SNF660R44U8W23 SNF660R46U8W23 SNF660R51U8W23 SNF660R54U8W23
SNS660軸承內置系列規格三螺桿泵
SNS660R40U8W2  SNS660R44U8W2  SNS660R46U8W2  SNS660R51U8W2 SNS660R54U8W2
SNS660R40U8W30  SNS660R44U8W30  SNS660R46U8W30  SNS660R51U8W30 SNS660R54U8W30
SNS660R40U8W21 SNS660R44U8W21 SNS660R46U8W21 SNS660R51U8W21 SNS660R54U8W21
SNS660R40U8W23 SNS660R44U8W23 SNS660R46U8W23 SNS660R51U8W23 SNS660R54U8W23
SNH660軸承外置系列規格三螺桿泵
SNH660R40E6.7W2  SNH660R44E6.7W2  SNH660R46E6.7W2  SNH660R51E6.7W2  SNH660R54E6.7W2
SNH660R40E6.7W30  SNH660R44E6.7W30  SNH660R46E6.7W30  SNH660R51E6.7W30  SNH660R54E6.7W30
SNH660R40E6.7W21 SNH660R44E6.7W21 SNH660R46E6.7W21 SNH660R51E6.7W21 SNH660R54E6.7W21
SNH660R40E6.7W23 SNH660R44E6.7W23 SNH660R46E6.7W23 SNH660R51E6.7W23 SNH660R54E6.7W23
SNF660軸承外置系列規格三螺桿泵
SNF660R40E6.7W2  SNF660R44E6.7W2  SNF660R46E6.7W2  SNF660R51E6.7W2  SNF660R54E6.7W2
SNF660R40E6.7W30  SNF660R44E6.7W30  SNF660R46E6.7W30  SNF660R51E6.7W30  SNF660R54E6.7W30
SNF660R40E6.7W21 SNF660R44E6.7W21 SNF660R46E6.7W21 SNF660R51E6.7W21 SNF660R54E6.7W21
SNF660R40E6.7W23 SNF660R44E6.7W23 SNF660R46E6.7W23 SNF660R51E6.7W23 SNF660R54E6.7W23
SNS660軸承外置系列規格三螺桿泵
SNS660R40E6.7W2  SNS660R44E6.7W2  SNS660R46E6.7W2  SNS660R51E6.7W2  SNS660R54E6.7W2
SNS660R40E6.7W30  SNS660R44E6.7W30  SNS660R46E6.7W30  SNS660R51E6.7W30  SNS660R54E6.7W30
SNS660R40E6.7W21 SNS660R44E6.7W21 SNS660R46E6.7W21 SNS660R51E6.7W21 SNS660R54E6.7W21
SNS660R40E6.7W23 SNS660R44E6.7W23 SNS660R46E6.7W23 SNS660R51E6.7W23 SNS660R54E6.7W23