【質量來自鴻盛集團】烤漆房紅外線電加熱裝置的選擇技巧——專供山東烤

     ▲山東鴻盛紅外線烤漆房【點擊查看發貨案例】（869人感興趣）

1. 紅外線熱源體的質量

1 the quality of infrared heat source body

買一臺紅外線電加熱設備，不可能去拆開輻射器看內部構造，看了也未必看得明白，所以要了解一下技術參數中，輻射器的功率，關鍵是看承諾的使用的壽命是多長時間，非正規廠出的或低略的產品在這方面模糊。

Buy a infrared electric heating equipment, won't be able to see the internal structure of radiator apart, see also may not see, so to understand the technical parameters, the key is to use the power of the radiator, see the promises of the life is long, informal or slightly lower plant products in this fuzzy.

2. 紅外線熱源體的保護

2 infrared heat source body protection

紅外線輻射器在工作的時候，在產生光輻射的同時紅外線輻射器外殼體也會產生熱，怎樣能將這些熱量盡快的排除掉，是保護紅外線熱源體使用壽命的關鍵，所以要了解一下固定輻射器裝置的散熱情況的合理性。

Infrared radiator at work, generate heat in the light radiation and infrared radiator shell will, how can the heat as soon as possible to rule out, is the key to protect the infrared heat source body life, so to understand the rationality of heat radiator fixed device.

3.紅外線熱源體在烤漆房或爐體內的布局

The layout of the 3 infrared heat source body in the baking room or stove.

要了解輻射器在烤漆房或爐體內的合理布局，看是不是將被烘烤的物體盡可能的被輻射到，還有它們之間的距離，輻射器與被烘烤的物體之間的距離過大，干燥效果會差;過小，有可能會將不耐高溫的物件烤壞，最佳的距離是800—1200mm。

To understand the radiator in a reasonable layout of the furnace body or paint room, see is not will be baked objects as much as possible by radiation, and the distance between them, between the radiator and the baked object distance is too large, the drying effect will be poor; too small, may be not high temperature baked objects bad, the best distance is 800 1200mm.

4. 紅外線熱源體裝置的安全性

4 infrared heat source body device security

⑴紅外線輻射器在工作的時候，正面的溫度高達幾百度，易燃物品，紙張靠近會在幾秒鐘內引起燃燒(已有多起案例)，所以紅外線熱源體裝置上一定有可靠的防護裝置，以保證安全。實際上作為熱源裝置就因該有保護措施。

The infrared radiator at work, positive temperature up to several hundred degrees, flammable items, paper close to cause burning in a few seconds (many cases), so the infrared heat source body device must have a reliable protection device, in order to ensure safety. In fact, as a heat source device due to the protective measures.

⑵紅外線輻射器的連接線一定要是匹配的耐高溫線，線與線之間的連接點一定要纏緊涮錫，保證接點不能虛。

The connecting line must be infrared radiator, high temperature wire, a connection point between the line and the line must be tightened up rinse tin, ensuring contact can not be empty.

⑶紅外線熱源體裝置一定要安裝地線，確保使用安全。

The infrared heat source body device must be installed in the ground, to ensure safe use.

⑷控制柜內一定要使用合格的漏電、過載等電器。

The control cabinet must use a qualified electrical leakage, overload etc..

5.價格不是評判一種產品質量的唯一標準，但價格過低，就應該有問題了，因為企業要賺取利潤，維持其正常運營，沒有利潤企業怎樣生存，所以價格在一定的合理范圍內是正常的。

5 the price is not the only standard to judge a product quality, but the price is too low, it should be a problem, because the enterprise must make a profit, to maintain the normal operation, how to survive without profit, so the price is normal in a reasonable scope.

6.售后服務也很重要，盡量找本地有可靠的售后服務隊伍的企業產品，因為該類產品屬電氣類，出現問題售后服務人員到達時間快慢至關重要。

6 after-sales service is also very important, as far as possible to find a reliable after-sales service team of enterprise products, because the product is a kind of electrical, there is a problem after service personnel arrival time is very important.

     ▲山東鴻盛紅外線烤漆房【點擊查看發貨案例】（968人感興趣）

山東鴻盛集團有限公司給您的承諾：